What You Need and How It Works

Ice axe loops give you a simple way to carry one or two ice axes on your backpack when you're traveling along snowy ridgelines or climbing icy peaks. The Zpacks Ice Axe Loops come as a pair, with one loop attached at each side of the pack. Each loop holds the head of the axe at the bottom and uses a shock cord band to keep the handle tight at the top. The system is removable, so you can take the loops off when you aren't carrying axes.

How to Attach the Ice Axe Loops

  1. Locate the attachment points: Find the designated webbing or daisy chain attachment points on each side of your backpack. The loops are designed to fit securely at these points.
  2. Secure the bottom loop: Thread the bottom loop of the ice axe loop through the attachment point on your pack. The head of the ice axe will later pass through this loop.
  3. Fasten the top shock cord band: Pull the shock cord band around the attachment point at the top of the pack. This band will hold the ice axe handle snugly against the pack.
  4. Insert the ice axe: Slide the head of the ice axe through the bottom loop, then tuck the handle under the shock cord band at the top. Adjust the tension so the axe sits securely without wobbling.
  5. Repeat for the second axe (optional): If you carry two axes, repeat the process on the opposite side of the pack using the second loop.

Product Evidence

  • Ice Axe Loops (Both Sides of Pack): A pair of loops are attached at each side of the pack for securing two ice axes. The head of each axe secures through a loop at the bottom, and the handle is kept tight at the top with a shock cord band. This confirms the loops support two axes and the attachment method is straightforward, using existing pack attachment points.

    Ice Axe Loops (Both Sides of Pack)

    Ice Axe Loops (Both Sides of Pack)

  • Ice Axe Loops (Both Sides of Pack): The loops can all come off when you aren't carrying axes. You can remove the loops to keep the pack streamlined for trips that don't require ice axes.

What the Catalog Confirms and What It Doesn't

The supplied information confirms that the loops fit the pack and the ice axe perfectly, and that the attachment uses a bottom loop and top shock cord. It does not specify exact webbing widths or attachment hardware details. If your backpack lacks daisy chains or side compression webbing, the loops may not attach directly. Check your pack's attachment points before ordering. The loops are designed for standard ice axe shafts; verify that your axe head and handle dimensions match the loop size.