Quick answer
To build the Aria 3 Piece Nursery Furniture Set, assemble the crib first, then the changer, and finally the clothes rail. Work in the nursery on a soft surface, keep the instructions handy, and tighten all fittings only after each piece is fully aligned. Expect the full set to take 60–90 minutes with basic tools.
Prepare your space and tools before you start
Clear a generous area in the nursery—at least 2 x 2 meters—so you can lay out parts without scratching them. The Aria set uses handwoven rattan, which can be damaged by rough surfaces, so place a clean sheet or cardboard on the floor. Have a Phillips screwdriver, a small hammer, and the supplied Allen key ready. Check that all hardware bags are present; if anything is missing, contact Cuddleco support before you begin.
Assemble the Aria crib: the core of the set
The crib is the most involved piece. Start by attaching the two side panels to the headboard and footboard using the bolts provided. Leave them slightly loose until all four corners are connected, then tighten evenly. Next, attach the base frame at the desired mattress height—most parents choose the higher setting for a newborn. Finally, insert the mattress. The Aria crib is designed for standard crib mattresses; if you are unsure of the size, measure your mattress against the internal frame before tightening everything.
Build the changer: safe and secure
The changer typically has a frame, a changing pad, and sometimes a storage shelf. Attach the side panels to the back panel first, then add the front rail. If your model includes a shelf, fix it in place before adding the top. Once the frame is solid, place the changing pad on top—it should sit flush without wobbling. Always use the safety strap when the changer is in use, and never leave a baby unattended on it.
Assemble the clothes rail: simple but sturdy
The clothes rail is the quickest piece. Attach the two vertical supports to the base, then connect the top rail. Some Aria rails have a hanging bar that screws into the sides; make sure it is level before tightening. If your rail has a shelf at the bottom, attach it last. Stand the unit upright and check for stability—if it rocks, adjust the feet or tighten the base connections.
Final safety checks and placement
Once all three pieces are assembled, go over every bolt and fitting to ensure they are tight. Check that the crib mattress fits snugly with no gaps larger than two fingers. Place the changer within arm's reach of the crib but not directly against it, to avoid entrapment hazards. The clothes rail should be against a wall or secured to prevent tipping. Finally, wipe all rattan surfaces with a dry cloth to remove any dust from assembly.
Step-by-step assembly checklist
- Unpack and sort all parts: Lay out every panel, screw, and tool. Compare against the manual's parts list. Missing a piece? Stop and contact Cuddleco before forcing anything.
- Assemble the crib frame: Connect sides to headboard and footboard, then attach the base at the higher mattress setting. Keep bolts loose until all corners are aligned, then tighten evenly.
- Install the crib mattress: Place the mattress into the base. It should fit snugly with no gaps wider than two fingers. A loose mattress is a safety risk—check the fit before moving on.
- Build the changer: Attach side panels to the back, then add the front rail and any shelf. Secure the changing pad on top. Test for wobble; tighten all fittings if the unit rocks.
- Assemble the clothes rail: Fix vertical supports to the base, then attach the top rail and hanging bar. Add the bottom shelf last. Ensure the rail stands level and does not tip when empty.
- Final tighten and safety check: Go over every bolt, check crib mattress fit, and secure the rail to the wall if possible. Place the changer away from the crib to prevent entrapment.
Aria set at a glance
- Aria 3 Piece Nursery Furniture Set - Rattan: The Aria 3 Piece Nursery Furniture Set includes a crib, changer, and clothes rail, all hand-made from rattan with a boho-chic design. Knowing exactly what is in the box helps you plan assembly order and space.
- Aria 2 Piece Nursery Furniture Set - Rattan: The Aria 2 Piece Nursery Furniture Set includes a crib and changer, also hand-made from rattan. If you already own the 2-piece set, you only need to add the clothes rail separately.
- Aria Wave Crib - Rattan: The Aria Wave Crib is a lightweight rattan bassinet with a mattress included, supported by black legs. This is a portable alternative if you want a bedside sleeper instead of a full-size crib.
