Quick answer
To build the Initial D Series #19 S15 Silvia 1/24 model kit, follow a careful order: clean parts, paint before assembly, use the masked window-frame stickers for a clean look, and apply decals with warm water for a smooth finish.
Why this kit stands out for Initial D fans
The Initial D Series #19 S15 Silvia model kit captures the chic yet aggressive design of the car driven by the Two Guys from Tokyo. It includes newly tooled parts like a muffler, bucket seats, and masked window-frame stickers that give a factory-clean look without painting the windows.
Because this is a 1/24 scale plastic model kit, you'll need basic modeling tools: a hobby knife, sprue cutters, sanding sticks, plastic cement, and paint. The kit does not include paint or glue, so plan your supplies before starting.
Step-by-step build guide
- Step 1: Clean and organize the parts: Use sprue cutters to remove parts from the runners. Trim nubs with a hobby knife and sand smooth with fine-grit sanding sticks. Sort parts by color or sub-assembly to avoid losing small pieces. Skipping cleanup leaves visible nub marks that ruin the paint finish.
- Step 2: Paint parts before assembly: Spray or brush paint each part while still on the sprue (or after cutting) using thin coats. Use masking tape for two-tone sections. Let paint cure fully before handling. Painting after assembly makes it hard to reach tight corners and leaves brush strokes.
- Step 3: Assemble the chassis and interior: Glue the floor pan, seats, dashboard, and steering wheel using plastic cement. Fit the bucket seats included in the kit. Attach the muffler to the rear underbody before closing the body shell. Test-fit each part before gluing; some joints may need sanding for a flush fit.
- Step 4: Build the body shell and apply window stickers: Glue the body halves together. Apply the masked window-frame stickers to the clear window parts, then press the windows into the body. The stickers give a painted-on look without masking tape. If the stickers don't adhere well, use a drop of clear glue on the edges to prevent lifting.
- Step 5: Apply decals and final assembly: Cut out decals, soak in warm water for 15-20 seconds, slide onto the painted body, and press out bubbles with a cotton swab. Attach wheels, mirrors, and the muffler tip. Let everything dry for 24 hours. Rushing decal application can cause silvering or peeling; use decal setting solution for stubborn curves.
Product facts
-
Initial D Series #19 The Two Guys From Tokyo S15 Silvia 1/24 Model Kit: This 1/24-scale model kit of the Nissan S15 Silvia includes newly tooled parts such as a muffler, bucket seats, and masked window-frame stickers for a clean factory look. The masked window stickers save you from painting window frames by hand, giving a crisp result even if you're new to model painting.
Initial D Series #19 The Two Guys From Tokyo S15 Silvia 1/24 Model Kit
