Quick answer
To keep your Retro Beast art print looking its best, frame it behind UV-filtering glass or acrylic, hang it away from direct sun and damp walls, and dust it gently with a dry microfiber cloth—never with household cleaners.
Why the right frame and spot matter more than cleaning
Most print damage comes from light and moisture, not dust. Even a few hours of direct afternoon sun each day can fade inks over months, and a wall that feels dry can still wick moisture through the frame backing. Choosing a UV-filtering glazing and an interior wall away from windows and bathrooms prevents the most common problems before they start.
- UV glazing slows fading but does not make a print sun-proof—keep it out of direct rays.
- Acrylic glazing is lighter and safer over large prints; glass is more scratch-resistant but heavier.
- A frame with a sealed backing and acid-free mat reduces exposure to dust and humidity.
When to handle the print—and when to leave it alone
Every time you touch the print surface, you risk transferring oils or creasing a corner. Handle it only when framing or moving it, and wear clean cotton gloves. Once it is framed and hung, leave it in place; spot-cleaning the glazing is safer than removing the print for a quick dusting.
A note on the Retro Beast tee
If you also own the Retro Beast tee, care for it separately from your print. The tee is a wearable garment, not a display piece, so follow the care label for washing and keep it away from the print to avoid dye transfer or accidental snags.
Step-by-step print care and display
- Unpack and inspect without touching the image: Hold the print by its edges or wear clean cotton gloves. Check for shipping damage before framing. Common mistake: pressing your fingers on the printed area, which leaves oils that attract dust and can stain over time. If you find creases or damage, contact the seller before framing.
- Choose a frame with UV-filtering glazing: Select a frame that fits the print exactly and uses UV-filtering glass or acrylic. Add an acid-free mat if you want breathing room around the image. Common mistake: using a cheap frame with non-filtering glass and no mat, which exposes the print to UV and lets it touch the glazing. Acrylic is lighter and safer for large prints; glass is more scratch-resistant but heavier.
- Hang away from direct sun and moisture: Pick an interior wall that never receives direct sunlight and is away from bathrooms, kitchens, and radiators. Use a level and two hooks for stability. Common mistake: hanging opposite a window that gets strong afternoon sun, which can fade the print even through UV glazing. Check the spot at different times of day to confirm no direct sun hits the print.
- Dust the glazing with a dry microfiber cloth: Wipe the frame and glazing gently with a dry microfiber cloth every few weeks. For smudges on glass or acrylic, use a cleaner labeled safe for that material and spray onto the cloth, not the glazing. Common mistake: spraying household glass cleaner directly on the frame, which can seep behind the glazing and stain the print. Never use paper towels or abrasive cloths on acrylic—they scratch.
- Control humidity and temperature swings: Keep the room between 60–75°F (15–24°C) and avoid placing the print near air vents, doors, or fireplaces. In damp climates, use a dehumidifier or silica packets behind the frame backing. Common mistake: hanging a print on a cold exterior wall where condensation can form behind the frame. A simple hygrometer can help you spot humidity spikes before they damage the print.
Product facts
-
Retro Beast: The Retro Beast tee is a black unisex t-shirt available in sizes S through 5XL with a retro-inspired graphic. If you pair the tee with your print display, choose a size that fits comfortably and keep the shirt away from the framed print to prevent dye transfer or snags.
Retro Beast