Start with what the mat is made of
The Trident Yoga Mat has two layers: a 4mm thick base of 100% natural tree rubber and a microfibre top layer that carries the trident print. That combination matters because the rubber base needs different care than the printed suede-like top. The microfibre layer is what you see and touch, and it is also where fading would happen if you scrub too hard or use the wrong cleaner.
Knowing the material helps you choose a cleaning method that removes sweat and dirt without dulling the design.
The Trident mat at a glance
-
Trident Yoga Mat + Free Yoga Bag: 100% Natural Rubber and Micro Fibre Top Layer The microfibre top holds the print, so cleaning must be gentle on that layer. The rubber base is durable but should not be soaked or left wet.
Trident <br><span class="free-promo">Yoga Mat + Free Yoga Bag</span>
-
Trident Yoga Mat + Free Yoga Bag: Simple to wipe down clean and machine washable. You have two supported cleaning options: a quick wipe after practice, or a machine wash for a deeper clean. Both are safe for the print when done correctly.
A wipe-down routine after every practice
For daily maintenance, a quick wipe is all you need. This removes sweat and oils before they settle into the microfibre top. Use a damp cloth with plain water or a mild, non-abrasive cleaner. Avoid bleach, ammonia, or anything with alcohol, which can strip the print over time.
Wipe the mat surface gently, then roll it up or hang it to air dry. Do not leave it in direct sunlight, as UV exposure can also fade the design.
- Dampen a soft cloth: Use water or a very mild soap solution. Wring it out so the mat is not soaked.
- Wipe the top layer: Go over the printed area with light pressure. No scrubbing or abrasive pads.
- Air dry: Lay the mat flat or hang it. Do not roll it up while damp.
When to machine wash instead
The Trident mat is machine washable, which is useful for a deeper clean when the mat has been used heavily or for hot yoga. The key is to keep the wash gentle to protect the print.
Use a cold or lukewarm cycle on a delicate setting. A small amount of mild detergent is enough. Do not use fabric softener or bleach. After the cycle, air dry the mat flat. Do not put it in the dryer, as heat can damage the rubber and the print.
- Machine wash on delicate: Cold or lukewarm water, mild detergent only.
- Air dry flat: Keep away from direct heat and sunlight to prevent fading.
A grip trick that also protects the print
If you practice in a dry climate, the mat's microfibre top may feel less grippy. The supplied care tip says: "If you are in a dry climate for extra grip sprinkle water on your mat where your hands and feet go before practice." This is safe for the print because you are only adding water, not rubbing or scrubbing. It is a good example of a practice that works with the mat's materials rather than against them.
Habits that keep the print from fading
Most fading happens from aggressive cleaning, harsh chemicals, or leaving the mat in the sun. Keep it simple: stick to the wipe-down routine for everyday use, machine wash only when needed, and always air dry in the shade. The Trident mat is designed to be easy to care for, and the print will stay vivid as long as you treat the microfibre top gently.



