Quick answer

Clean your Caged Wall Light Medium Cross with a soft, dry microfiber cloth to remove dust, and use a barely damp cloth for stubborn smudges on the matte black metal cage and back panel. Always switch off power and let bulbs cool before touching.

Why regular cleaning matters for your wall sconce

The Caged Wall Light Medium Cross is a versatile fixture that works alone or in a linear procession. Its matte black metal cage and changeable back panel collect dust and fingerprints over time, especially in high-traffic areas. Regular care preserves the finish and keeps the light output strong.

A common mistake is using harsh chemicals or abrasive cloths that can scratch the matte black coating. Stick to gentle methods and you'll avoid damaging the surface.

Step-by-step cleaning and maintenance

  1. 1. Turn off power and let the bulb cool: Switch off the wall switch or circuit breaker. Wait at least 5 minutes for the bulb (sold separately) to cool completely to avoid burns. Never clean a hot bulb; thermal shock can cause it to break.
  2. 2. Dust the metal cage with a dry microfiber cloth: Use a clean, dry microfiber cloth to gently wipe the matte black metal cage. Work from top to bottom to avoid redistributing dust. For tight corners around the cross pattern, use a soft brush attachment on a vacuum or a compressed air duster. Avoid feather dusters that can leave fibers on the matte finish.
  3. 3. Clean the back panel and interior: Remove the back panel if needed (refer to your installation guide). Wipe the interior and the back panel with a barely damp cloth—water only, no cleaners. Dry immediately with a separate dry cloth to prevent moisture spots. Do not let water pool inside the fixture; it can damage electrical components.
  4. 4. Address stubborn smudges on the metal cage: For fingerprints or grease, lightly dampen a microfiber cloth with distilled water and a drop of mild dish soap. Wipe the affected area, then follow with a dry cloth. Never spray liquid directly onto the fixture. Harsh cleaners or ammonia-based products will strip the matte black finish.
  5. 5. Reassemble and restore power: Once all parts are completely dry, reattach the back panel. Restore power and check that the light operates correctly. If you notice flickering, the bulb may need reseating. Wait until everything is bone-dry before switching power back on.

Product details

  • CAGED WALL / MEDIUM / CROSS: The Caged Wall / Medium is made from a matte black metal cage and comes with a changeable back panel. The matte finish requires non-abrasive cleaning to avoid visible scratches, and the removable back panel makes interior dusting easier.

    CAGED WALL / MEDIUM / CROSS

    CAGED WALL / MEDIUM / CROSS