Quick Answer
Use LensPen for Drones to safely remove dust, fingerprints, and grease from your drone camera lens. Its retractable brush clears debris, then the non-liquid cleaning element gently lifts smudges without leaving residue.
Why LensPen for Drones is a safer choice than liquid cleaners
Liquid cleaning solutions can seep into the small gaps around drone camera lenses and sensors, risking internal damage. LensPen for Drones uses a dry, non-liquid cleaning element that never dries out, so you avoid moisture-related issues entirely.
The built-in retractable brush is specifically sized for drone optics, letting you dislodge dust and sand without scratching the glass. This makes it a practical tool for field maintenance between flights.
Step-by-Step Cleaning Process
- Power off and inspect the lens: Turn off the drone and remove any protective cover. Hold the drone steady and examine the lens under good light to identify dust, smudges, or debris. Check for cracks or damage before cleaning; if the lens is damaged, consult a professional rather than cleaning.
- Use the retractable brush to remove loose particles: Extend the brush and gently sweep across the lens surface in one direction. This lifts dust and sand without pressing them into the glass. Avoid using compressed air, which can push debris deeper into the lens assembly.
- Apply the cleaning element with light pressure: Remove the cap to expose the cleaning element. Use a circular motion with light pressure to lift fingerprints and grease. Do not press hard; the element works without force. If smudges persist, repeat the brush step first to ensure no grit remains that could scratch the lens.
- Inspect and re-cap the LensPen: After cleaning, check the lens for any remaining marks. Replace the cap securely to keep the cleaning element clean and ready for next time. Store the LensPen in a dry place; the non-liquid element requires no maintenance.
Product Facts
-
LensPen® for Drones: LensPen for Drones comes with a retractable dust removal brush and a special non-liquid cleaning element designed to never dry out. The brush removes loose particles before they can scratch the lens, and the non-liquid element safely lifts fingerprints and grease without leaving moisture or residue.
LensPen® for Drones
