Quick Answer

To clean your https://simplemodernhd.com/products/trek-pivot-tumbler-330396https://simplemodernhd.com/products/trek-pivot-tumbler-330414https://simplemodernhd.com/products/trek-pivot-tumbler-330415https://simplemodernhd.com/products/trek-pivot-tumbler-330420Trek Pivot Tumbler, disassemble the multi-use leakproof lid by removing both interchangeable sipping pieces, then wash the lid components and stainless steel body with warm soapy water. Rinse thoroughly and air-dry all parts before reassembling. Avoid harsh abrasives and never submerge the tumbler body in water for long periods.

What You’ll Need

Before you start, gather a soft sponge or bottle brush, mild dish soap, warm water, and a clean microfiber cloth. For deeper cleaning, white vinegar or baking soda can help remove stubborn odors or mineral buildup. Avoid using steel wool or abrasive scrubbers, as they can scratch the double-wall insulation finish.

Why Regular Cleaning Matters

The Trek Pivot Tumbler’s double-wall insulation keeps drinks hot or cold for hours, but trapped moisture in the lid can lead to mold or stale smells if not cleaned regularly. The multi-use leakproof lid has small crevices where residue can hide, so disassembling the sipping components is essential for thorough cleaning. A quick rinse after each use and a deeper clean every few days will keep your tumbler fresh and functional.

Step-by-Step Cleaning Process

  1. Disassemble the Lid Completely: Remove the lid from the tumbler. Press the tabs to release the straw piece and the chug piece from the lid. Set both pieces aside. Common mistake: Leaving one sipping piece attached. Both must come out to access hidden crevices.
  2. Wash the Lid Components: Use a bottle brush or soft sponge with warm soapy water to scrub the lid, straw piece, and chug piece. Pay extra attention to the silicone seal and the underside of the lid where liquid can pool. Checkpoint: Rinse each piece under running water until no soap bubbles remain. Residual soap can alter the taste of your next drink.
  3. Clean the Tumbler Body: Fill the tumbler with warm soapy water and use a bottle brush to scrub the interior walls and bottom. Wipe the exterior with a damp cloth. Do not submerge the tumbler or place it in the dishwasher. Common mistake: Soaking the tumbler body. The double-wall insulation is sealed, but prolonged submersion can compromise the vacuum seal over time.
  4. Rinse and Air-Dry All Parts: Rinse every component thoroughly with clean water. Place the lid pieces and tumbler upside down on a drying rack or clean towel. Allow them to air-dry completely before reassembling. Checkpoint: Ensure the silicone seal and lid crevices are fully dry to prevent mold growth. This usually takes 2–4 hours.
  5. Reassemble the Lid: Once all parts are dry, snap the straw and chug pieces back into the lid. Attach the lid to the tumbler and give it a gentle shake to confirm the leakproof seal is secure. Verdict: If the lid leaks after reassembly, double-check that both sipping pieces are fully seated. A misaligned piece is the most common cause of leaks.

Product Facts

  • Trek Pivot Tumbler: Multi-Use Leakproof Lid: Featuring two interchangeable leakproof lid pieces, you can choose your preferred sipping method - straw or chug - and easily swap out the sipping component within the lid at any time. The interchangeable lid pieces mean you must remove both the straw and chug components to clean all crevices. Missing one piece can leave residue that affects taste and hygiene.
  • Trek Pivot Tumbler: Double Wall Insulation: Keeps beverages hot or cold for hours. The vacuum insulation is sealed, so you only need to clean the interior surface. Never put the tumbler in the dishwasher or soak it, as prolonged moisture can damage the insulation seal over time.