Why Cleaning Matters for Your AURA Eye Beauty Device

The AURA Eye Beauty Device uses high-frequency vibrations, hot therapy, and EMS technology to help reduce eye fatigue, dark circles, and puffiness. Because the device's bionic finger design places dual-contact metal electrode poles directly against the delicate eye contour, keeping the contact surfaces clean is essential for both hygiene and consistent performance.

This guide covers a safe cleaning routine based on the supplied product information. It focuses on what you can do without risking damage to the device's electronics or hypoallergenic metal surfaces.

What the AURA Device Needs for Safe Cleaning

  • TOUCHBeauty™ AURA Eye Beauty Device | Lift, Brighten & Revitalize Eyes: The device massage head was designed with dual-contact poles to better fit and treat the eye contour. The two semi-curved hypoallergenic metal electrode poles gently glide around the eye contour for close and effective treatment. The metal electrode poles are the parts that contact your skin and any eye cream or serum you apply. They require gentle cleaning to avoid scratching or damaging the hypoallergenic surface.

    TOUCHBeauty™ AURA Eye Beauty Device | Lift, Brighten & Revitalize Eyes

    TOUCHBeauty™ AURA Eye Beauty Device | Lift, Brighten & Revitalize Eyes

  • TOUCHBeauty™ AURA Eye Beauty Device | Lift, Brighten & Revitalize Eyes: SOOTHING MASSAGE MODE utilizes high-frequency vibrations and hot therapy 38-42℃ to maximize the performance of your favorite skincare products. Residue from skincare products can build up on the device head over time, which may reduce the effectiveness of the hot therapy and vibrations. Regular cleaning removes this buildup.

How to Clean the AURA Eye Beauty Device

The supplied product information does not include a detailed manufacturer cleaning protocol, so the following steps are based on general best practices for similar electronic beauty devices with metal contact surfaces. Always ensure the device is turned off and unplugged before cleaning.

  1. Step 1: Prepare a gentle cleaning solution: Mix a small amount of mild, fragrance-free soap with lukewarm water. Avoid harsh detergents, alcohol-based cleaners, or abrasive scrubbers, as these may damage the hypoallergenic metal coating or the device's plastic housing.
  2. Step 2: Dampen a soft, lint-free cloth: Dip a soft cloth (like a microfiber cloth) into the soapy water and wring it out well so it is damp, not wet. Excess moisture could seep into the device's internal electronics.
  3. Step 3: Gently wipe the electrode poles and device head: Using the damp cloth, carefully wipe the two metal electrode poles and the surrounding area. Avoid applying excessive pressure that could bend or misalign the dual-contact poles.
  4. Step 4: Rinse with a clean damp cloth: Use a second clean, damp cloth with plain water to remove any soap residue from the device head. Soap residue can irritate the delicate eye area during next use.
  5. Step 5: Dry the device thoroughly: Pat the device dry with a soft, dry cloth. Allow it to air-dry completely for a few minutes before storing or using it again. Do not use a hair dryer or place the device on a heater, as heat can damage the internal components.

When to Clean and What to Avoid

For best hygiene, clean the AURA device after each use, especially if you used it with eye cream or serum. The device's hot therapy (38-42℃) can help products absorb, but it also means product residue may dry onto the metal poles more quickly.

Never submerge the device in water or run it under a tap. The device is electronic and not waterproof. Also avoid using paper towels or tissues, as their fibers can scratch the metal surface. Stick to soft, lint-free cloths.

Storing Your AURA Device Between Uses

After cleaning and drying, store the device in a cool, dry place away from direct sunlight and moisture. The supplied information does not specify a storage case, but keeping the device in a clean, dust-free drawer or pouch will help maintain its condition. Avoid storing it in the bathroom, where humidity can affect the electronics.

Where the Supplied Information Stops

The product information confirms the device's features and the bionic finger design, but does not include a manufacturer cleaning protocol. The steps above are based on general safe practices for similar devices. If you have specific concerns about cleaning or maintaining your AURA device, consult the user manual that came with your purchase or contact TOUCHBeauty customer support.