Quick answer

To display a heavy 8-inch Concrete Dunny safely, place it on a sturdy, level shelf or stand that can support at least three pounds, and avoid direct sunlight and extreme temperatures. Use a non-slip pad or museum gel to prevent sliding, and never lift it by the head or arms—always support the base.

Assess your display space for weight and stability

Before you place your Concrete Dunny, check that the surface can handle its weight. At three pounds, it's heavier than typical vinyl figures, so flimsy shelves or glass tables may not be safe. Choose a solid wood, metal, or reinforced shelf that is level and securely mounted. Avoid high-traffic areas where it could be bumped.

Choose the right shelf or display stand

For heavy figures, a dedicated display stand or a shelf with a raised edge works best. If using a stand, ensure it has a wide base and can support at least five pounds for safety margin. A low shelf is safer than a high one, reducing the risk of falls. Consider a corner shelf or a wall-mounted unit anchored into studs.

Prepare the surface to prevent scratches and slipping

Concrete can scratch delicate surfaces, and its weight can cause sliding. Place a soft, non-slip pad or a piece of felt under the figure. Museum gel or mounting putty can also secure it without leaving residue. Avoid placing it directly on glass or polished wood without protection.

Position for visibility and safety

Place your Dunny at eye level or slightly below for the best view, but not so high that it's hard to reach. Keep it away from edges, direct sunlight, and heat sources like radiators, which can cause cracking over time. If you have pets or children, consider a enclosed cabinet or a high shelf they can't reach.

Handle and move with care

When moving your Concrete Dunny, always lift it from the base with both hands. Never grab it by the head, arms, or ears—these parts are not designed to bear the weight. Set it down gently; dropping even a few inches can chip the concrete or damage the surface below.

Step-by-step display guide

  1. Check shelf weight capacity: Ensure your shelf or stand can hold at least 5 pounds. Common mistake: assuming a glass shelf is strong enough—check the manufacturer's weight limit. If unsure, choose a lower, solid wood shelf.
  2. Add a non-slip base: Place a rubber pad, felt, or museum gel under the figure. Common mistake: skipping this step, leading to scratches or sliding. This also protects the Dunny's base from scuffs.
  3. Position away from edges and sunlight: Keep the figure at least 2 inches from the shelf edge and out of direct sun. Common mistake: placing it near a window, which can cause fading or heat damage. Rotate periodically to avoid uneven fading.
  4. Lift from the base only: When moving, support the entire base with both hands. Common mistake: lifting by the head or arms, which can cause breakage. Teach others in the household to do the same.
  5. Dust gently and regularly: Use a soft, dry cloth or a soft-bristle brush to remove dust. Common mistake: using water or cleaning sprays, which can damage the concrete finish. For stubborn dirt, a slightly damp cloth is okay, but dry immediately.

Product facts