Check Your Stick Diameter Before You Buy

A rubber ferrule (also called a walking stick tip or cane tip) is a simple replacement part, but it needs to fit your stick's diameter. If the ferrule is too loose, it can slip off. If it's too tight, you may not get it on at all.

Measure the diameter of your walking stick's existing tip (or the end of the shaft) with a ruler or caliper. The measurement is critical because ferrules are sold in specific sizes. For example, the Rubber Walking Stick Tip/Ferrule - Black fits a 21 mm diameter, the Ridged Rubber Ferrule - Black fits 16 mm, and the Plain Rubber Ferrule - Grey fits 27 mm. All three are sold in packs of two, so you have a spare ready.

Ferrule Size Options

  • Ridged Rubber Ferrule - Black: This pack includes two black ferrules, each designed to fit stick diameters of 16 mm. If your stick measures 16 mm, this ridged ferrule is the correct size choice.

    Ridged Rubber Ferrule - Black

    Ridged Rubber Ferrule - Black

  • Rubber Walking Stick Tip/Ferrule - Black: Available to fit stick diameters of 21 mm. 2 per pack. For a 21 mm stick, this standard rubber tip is the right fit.

    Rubber Walking Stick Tip/Ferrule - Black

    Rubber Walking Stick Tip/Ferrule - Black

  • Plain Rubber Ferrule - Grey: Available to fit stick diameters of 27 mm. 2 per pack. Larger-diameter sticks (27 mm) need this grey ferrule for a secure fit.

How to Fit a Rubber Ferrule

Fitting a new ferrule is straightforward. You'll need the correct size ferrule and a little patience.

  1. Remove the old tip: If your walking stick has a worn or damaged rubber tip, pull it off by hand. If it's stuck, use a twisting motion. Dispose of the old tip.
  2. Clean the stick end: Wipe the end of the stick with a dry cloth to remove dirt or debris. A clean surface helps the new ferrule grip better.
  3. Fit the new ferrule: Push the new rubber ferrule onto the stick end. Apply firm, even pressure. If it's a tight fit, you can soften the rubber slightly by dipping it in warm water for a few seconds, then dry it and push it on.
  4. Check the fit: Ensure the ferrule is fully seated against the stick. Give it a gentle tug to confirm it's secure. The ferrule should not rotate or slide off easily.

When to Replace a Walking Stick Tip

Replace the rubber ferrule when the tread is worn smooth, the rubber is cracked, or the tip no longer grips the floor securely. A worn tip reduces stability and increases the risk of slipping. Since all the ferrules listed come in packs of two, you can replace both tips at once or keep one as a backup.