Before You Start: What You Need

The For Your Little One AllStage 360 is an i-Size (R129) certified car seat that fits children from birth to approximately 12 years (36 kg). It supports ISOFIX installation for rock-solid stability and can also be secured using the vehicle seat belt. Before beginning, check that your vehicle is ISOFIX-compatible or has a three-point seat belt suitable for child restraints. The seat comes with a 5-point harness, 360-degree rotation, and multiple recline positions. Note that the Grade A Return version may not ship in its original packaging, but all parts are in new condition and the warranty remains intact.

ISOFIX Installation Steps

Follow these steps to install the AllStage 360 using ISOFIX connectors. Always refer to your vehicle owner's manual and the car seat instructions for specific guidance.

  1. Locate ISOFIX anchor points: Find the ISOFIX anchor points between the seat back and cushion of your vehicle. They are usually marked with a symbol.
  2. Extend the ISOFIX arms: Pull the ISOFIX connectors out from the base of the car seat until they lock into the extended position.
  3. Attach to anchor points: Align the connectors with the vehicle's ISOFIX anchor points and push firmly until you hear a click, indicating a secure connection.
  4. Push seat back firmly: Press the car seat firmly against the vehicle seat to remove any slack. Check that the ISOFIX indicators show green (locked).
  5. Secure the top tether (if required): Some installation modes may require a top tether. Attach the tether strap to the corresponding anchor point in your vehicle and tighten.

Belted Installation Steps

If your vehicle does not have ISOFIX, you can install the AllStage 360 using the vehicle's three-point seat belt. The seat belt routing path is designed to secure the seat firmly.

  1. Thread the seat belt: Pull the vehicle seat belt across the front of the car seat, following the belt guides marked on the seat shell. Ensure the belt is not twisted.
  2. Buckle the seat belt: Insert the buckle tongue into the vehicle buckle until it clicks. Pull the shoulder belt to tighten, removing all slack.
  3. Lock the seat belt: Engage the vehicle's automatic locking retractor (ALR) by pulling the belt all the way out and then letting it retract slowly. You should hear a ratcheting sound.
  4. Check for movement: Grasp the car seat at the belt path and try to move it side-to-side and front-to-back. Movement should be minimal; follow the product instructions for the correct installation tightness.

Key Features That Help with Installation

Adjusting the Seat as Your Child Grows

The AllStage 360 transitions through four groups: Group 0+/1 (birth to 18 kg, approx. 0–4 years) rear- or forward-facing with the 5-point harness; Group 2 (15–25 kg, approx. 4–6 years) forward-facing with harness; and Group 3 (22–36 kg, approx. 6–12 years) high-back booster mode. The one-hand adjustable headrest has 7 height positions to accommodate your child's growth. When moving from rear-facing to forward-facing, simply rotate the seat using the 360-degree rotation feature—no need to uninstall the base.

Important Safety Checks After Installation

After installing the seat, always perform a final safety check: ensure the ISOFIX indicators show green (if using ISOFIX), the seat belt is locked and tight (if using belt), and the harness is snug against your child with the chest clip at armpit level. The seat covers are machine-washable and removable for easy cleaning. If you have any doubts about installation, consult the car seat manual or a certified child passenger safety technician.