Choosing the Right Size for Your Shoe
The Balego Adjustable Heel Lift is available in Small, Medium, and Large sizes. Selecting the correct size is about matching the lift to your shoe's heel pocket, not just your shoe size. A lift that is too wide may wrinkle or crowd the shoe, while one that is too narrow may feel less stable.
Small fits smaller shoes and narrower heel pockets, Medium fits most average adult footwear (women’s 8.5 through men’s 11), and Large fits larger shoes, work shoes, athletic shoes, and boots. If you are between sizes or unsure, consider the shoe's actual heel depth rather than relying solely on the printed size.
Balego Adjustable Heel Lift at a Glance
-
Adjustable Heel Lift | 3-Layer Shoe Lift, 1/8–3/8 Inch: Three-layer peel-away design provides selectable heights of 1/8", 1/4", or 3/8". You can adjust the elevation without buying multiple separate lifts, making it easy to find the right height for your needs.
Adjustable Heel Lift | 3-Layer Shoe Lift, 1/8–3/8 Inch
-
Adjustable Heel Lift | 3-Layer Shoe Lift, 1/8–3/8 Inch: Sold individually, not as a pair. Order two only if you need lifts in both shoes. This avoids unnecessary cost and waste.
-
Adjustable Heel Lift | 3-Layer Shoe Lift, 1/8–3/8 Inch: Extra-firm foam with a suede leather top surface. The firm construction provides stable elevation rather than soft cushioning, which is important for maintaining proper positioning.
How to Adjust the Height
The Balego heel lift uses a peel-away design. Start with all three layers for a 3/8-inch lift. Remove complete lower layers to reduce the height: keep two layers for 1/4 inch, or one layer for 1/8 inch. Peel slowly to avoid damaging the layer that will remain in use.
- 1. Confirm the intended height: If your height was professionally prescribed, start with that setting. If you are experimenting, begin with the lowest height (1/8 inch) and increase only if needed.
- 2. Remove complete lower layers: Peel away one or two full layers from the bottom. Do not remove partial layers, as the product is designed for discrete height settings, not continuous adjustment.
- 3. Keep removed layers: Store any removed layers in case you need to increase the height later. The lift can be reassembled if needed.
Fitting the Lift in Your Shoe
Place the lift in the heel area of your shoe, suede side up. Make sure it sits flat and does not shift or rock. Recheck stability each time the lift height changes.
- Check heel security: After inserting the lift, put on the shoe and walk a few steps. Your heel should not slide forward or lift out of the shoe. Forward movement may indicate excessive height.
- Watch for rocking or shifting: If the lift rocks or shifts inside the shoe, the size or placement may be wrong. Try a different size or reposition the lift.
- Consider shoe depth: Higher settings require more internal volume. If the shoe feels too tight or your heel feels crowded, reduce the height or choose a shoe with a deeper heel pocket.
Wearing Tips for Comfort
When wearing a heel lift for the first time, start with shorter periods to allow your foot and gait to adjust. If you experience heel slippage, the lift height may be too high for that shoe. Reassess after changing height.
The lift is designed for closed shoes with adequate heel depth. It is not a soft gel heel cup for impact absorption, but a firm elevation tool. Use it as directed by a clinician, especially for leg-length discrepancy, post-surgical rehabilitation, or persistent discomfort.
Clean the lift by wiping the suede and foam surfaces gently with a slightly damp cloth. Allow it to air dry fully before returning it to the shoe. Do not machine wash, tumble dry, or soak the lift.
When to Replace the Lift
Replace the Balego Adjustable Heel Lift if the foam remains compressed, layers separate, the top cover wears through, or the lift no longer stays stable inside the shoe. Do not share a used lift with others.
