Quick answer

To fit a Banwood Eco Helmet correctly, measure your child's head circumference and adjust the fit system so the helmet sits level and snug, with the front edge about two finger-widths above the eyebrows.

Why a proper fit matters

A helmet only protects when it stays in place during a fall. A loose helmet can shift or come off, while one that's too tight causes discomfort and may lead to your child refusing to wear it. The Banwood Eco Helmet is designed with a lightweight recycled ABS shell and EPS foam liner, certified to EN 1078 and CPSC standards, but certification assumes a correct fit.

The helmet is available in a 50-54 cm size, which fits most children roughly 3 to 8 years old. However, head shapes vary, so always measure before buying and re-check the fit as your child grows.

Common fitting mistakes to avoid

Many parents place the helmet too far back or too far forward. A tilted helmet exposes the forehead or the back of the head, reducing protection in a fall. Another common issue is leaving the straps too loose, which allows the helmet to slide even if the fit system is snug.

Also, don't skip the chin strap test: if you can fit more than one finger between the strap and the chin, it's too loose. The helmet should not move when you gently push it from side to side or up and down.

Step-by-step fitting guide

  1. Measure head circumference: Use a flexible tape measure to measure around the widest part of the head, just above the eyebrows and ears. Note the measurement in centimeters. The Banwood Eco Helmet fits 50-54 cm; if your child's head is outside this range, consider a different size. Re-measure every few months, as children's heads grow quickly.
  2. Position the helmet level: Place the helmet on the head so it sits level, covering the forehead. The front edge should be about two finger-widths above the eyebrows. It should not tilt back or forward. Check in a mirror: the helmet should look horizontal, not tilted.
  3. Adjust the fit system: Turn the adjustment dial at the back of the helmet to tighten until the helmet feels snug but comfortable. It should not wobble when you gently shake your head. If the helmet shifts, tighten more or consider a different size. If the helmet leaves red marks after short wear, it's too tight; loosen slightly.
  4. Secure the chin strap: Fasten the chin strap and adjust the buckle so it sits flat under the chin. You should be able to fit one finger between the strap and the chin—no more. The strap should feel snug but not choking. Test the fit: open your mouth wide; the helmet should pull down slightly. If it doesn't, tighten the strap.
  5. Do the shake test: Once everything is adjusted, have your child shake their head and try to push the helmet off. The helmet should stay in place without shifting. If it moves, re-adjust the fit system and straps. Perform this test before every ride, especially after your child has been wearing the helmet for a while.

Product spotlight

  • BANWOOD ECO HELMET - OLIVE (50-54 cm): The Banwood ECO Helmet - Olive (50-54 cm) features a recycled ABS shell and EPS foam liner, certified to EN 1078 and CPSC standards. These certifications confirm impact protection, but only a correct fit ensures the helmet stays in place to provide that protection.

    BANWOOD ECO HELMET - OLIVE (50-54 cm)

    BANWOOD ECO HELMET - OLIVE (50-54 cm)