Quick Answer
Fit the C38 sleeves by sliding each over the tripod leg from the top, aligning the seam to the inside, and securing with the built-in straps. For the C38.1 monopod sleeve, simply slide it over the monopod leg and adjust the hook-and-loop closure for a snug fit.
Why the C38 Sleeves Are a Solid Choice
The C38 Lightweight Tripod Leg Sleeves are designed for tripods without cross supports, so they slip on easily without fighting any braces. They are made from lightweight Hardwood Green material that helps camouflage the legs from top to bottom, which is handy when you're set up in the field and want to stay hidden from wildlife.
One thing to note: the C38 sleeves come in a set of three, so they cover a standard tripod. If you use a monopod, the C38.1 Single Leg Sleeve is sold separately and does the same job for a single leg. Both are lightweight, so they won't add noticeable bulk to your kit.
How to Fit the C38 Tripod Leg Sleeves & C38.1 Monopod Sleeve
- Prepare the tripod: Extend the tripod legs fully and lock them in place. This gives you a straight, stable surface to slide the sleeve over. Check that the leg locks are secure before sliding the sleeve.
- Slide the sleeve over the leg: Start at the top of the leg (near the head) and slide the C38 sleeve down over the leg. The sleeve is open at both ends, so it should move freely. Work it down gently to avoid bunching. If the sleeve sticks, twist it slightly as you pull rather than forcing it—this prevents snagging on any small protrusions.
- Align the seam and adjust: Rotate the sleeve so the seam runs along the inside of the tripod leg (facing the center). This keeps the camouflage pattern facing outward and reduces the chance of the seam catching on brush. Make sure the seam is not twisted; a twisted seam can cause the sleeve to slip or look uneven.
- Secure the sleeve: The C38 sleeves have built-in straps (usually hook-and-loop) at the top and bottom. Wrap each strap snugly around the leg and fasten. Do not overtighten—just enough to hold the sleeve in place without compressing the leg. Check that the straps are not too loose; a loose strap is a common cause of sleeves sliding down during use.
- Fit the monopod sleeve (if using): For the C38.1 Single Leg Sleeve, slide it over the monopod leg from the top, just like the tripod version. Adjust the hook-and-loop closure so it fits snugly around the leg. If the sleeve feels loose, reposition the closure tighter; a snug fit prevents it from rotating while you walk.
- Test the fit: Once all sleeves are fitted, extend and collapse the tripod legs a few times to ensure the sleeves don't interfere with the leg locks or the tripod's movement. Adjust if necessary. If a sleeve catches on a lock, reposition it slightly higher or lower to avoid obstruction.
Product Facts
-
C38 Lightweight Tripod Leg Sleeves & C38.1 Monopod Leg Sleeve: Set of three leg sleeves (for tripods without cross supports), lightweight Hardwood Green, length 1.5m. The 1.5m length covers most tripod legs fully, and the Hardwood Green pattern helps you blend into woodland or scrub while stalking wildlife.
C38 Lightweight Tripod Leg Sleeves & C38.1 Monopod Leg Sleeve
Once fitted, your tripod legs will be fully camouflaged and protected. If you plan to use the sleeves in wet conditions, check the straps periodically for wear.
