Quick answer
Fit the Dinopaws harness first, then the collar, then attach the lead. Adjust the harness straps with the safety lock open, check two-finger clearance at the neck and chest, and only then clip the lead to the harness.
Why the harness comes before the collar
The Dinopaws bundle pairs an adjustable neck harness with a matching collar and lead, but they do different jobs. The harness carries walk pressure across the chest and neck, so it needs the most precise fit. The collar is a backup point for identification and a place to clip the lead if you prefer, but it should sit snug without pressing on the throat.
Fitting the harness first means you can adjust the neck opening without a collar in the way, then set the collar to sit below the harness neckline rather than overlapping it.
When the standard strap range will not work
The Dinopaws harness and collar are sold with separate size options, so the harness size and collar size can be chosen independently. If your pup sits between sizes, choose the harness size that matches the chest measurement rather than sizing up for room to grow; a loose neck opening lets the harness slide forward on the walk.
The catalog does not list a precise strap-length range for each size, so use the two-finger check in the steps below as your real-world limit. If you cannot get two fingers under the neck strap without it slipping over the shoulders, the harness is too large regardless of the label.
Fitting steps for the Dinopaws bundle
- Measure the neck and chest: Use a soft tape to measure the widest part of the chest and the base of the neck where the harness neckline will sit. Write both numbers down before choosing harness and collar sizes. Measure the chest, not just the neck; the chest measurement decides the harness size.
- Open the safety locks and loosen the straps: Unclip the safety lock on the harness and collar and loosen all adjustment points so the harness slides over the head easily. Do not force it over the ears. If the harness will not slide on with the straps loosened, recheck the size before tightening anything.
- Set the neck opening first: Slide the harness over your dog's head and adjust the neck strap until you can fit two fingers flat between the strap and the neck. The neckline should sit behind the ears and in front of the shoulders. A neck opening that slips over the shoulders is too loose, even if it passes the two-finger test.
- Adjust the chest strap: Tighten or loosen the chest strap so the harness sits flat against the body without gaping at the sides. Check that the front panel does not press into the throat when your dog lowers their head. Watch your dog walk and sniff; a chest strap that rides up during sniffing needs one more adjustment.
- Fit the collar below the harness neckline: Fasten the collar so it sits below the harness neck opening, not underneath it. Use the same two-finger check, then close the collar's safety lock. If the collar and harness overlap, loosen the collar one notch rather than the harness.
- Attach the lead and do a walk test: Clip the lead to the harness attachment point, close the harness safety lock, and walk a short distance with light pressure on the lead. Check for rubbing under the front legs and at the armpits. Recheck the two-finger clearance after the first five minutes of walking, since straps settle once the dog moves.
Bundle details that affect fitting
-
Dinopaws Adjustable Neck Harness, Lead & Collar Bundle: The Dinopaws set includes an adjustable neck harness, a lead and a collar, with a safety lock on both the harness and collar. The safety locks should be open while you adjust straps and closed only after the fit check, so the harness cannot shift mid-walk.
Dinopaws Adjustable Neck Harness, Lead & Collar Bundle
-
Dinopaws Adjustable Neck Harness, Lead & Collar Bundle: Harness size and collar size are selected separately as available options. You can match each piece to your dog's neck and chest measurements instead of accepting one combined size.
