Why Use a Footprint for Your C Bar 2 Tent

A footprint is the easiest way to extend the life of your tent floor. For the C Bar 2, using a Big Agnes footprint or ground cloth protects the tent floor from sharp rocks, roots, and abrasion. It also gives you the option to pitch a lightweight Fast Fly shelter, leaving the tent body behind.

How to Install the C Bar 2 Footprint

Setting up the C Bar 2 Footprint is straightforward. Follow these steps for a secure fit.

  1. 1. Choose a level, debris-free site: Clear the area of sharp objects. A clean site prevents damage to both the footprint and tent floor.
  2. 2. Unfold the footprint and orient it: Lay the C Bar 2 Footprint flat with the grommets or attachment points facing up. Align it with the tent's intended position.
  3. 3. Stake down the footprint corners: Use stakes through the corner loops to secure the footprint. Keep it taut but not stretched.
  4. 4. Set up your tent on top: Pitch your C Bar 2 tent as usual. The footprint should sit just inside the tent's outline, not extending beyond the fly edge.

Fast Fly Setup with the C Bar 2 Footprint

One of the best features of the Big Agnes footprint is the Fast Fly configuration. This setup uses only the footprint, tent fly, poles, and stakes, leaving the tent body at home. It saves significant weight and is ideal for minimalist trips or when you need a quick shelter. The footprint acts as the groundsheet while the fly provides weather protection.

C Bar 2 Footprint Key Facts

  • C Bar 2 Footprint: The Big Agnes footprint enables you to pitch a lightweight, Fast Fly shelter while leaving the tent body behind. This means the C Bar 2 Footprint is not just a ground protector—it's a key component for an ultralight shelter option.

    C Bar 2 Footprint

    C Bar 2 Footprint

  • C Bar 2 Footprint: The Fast Fly configuration requires the footprint, tent fly, poles, and stakes. When planning a Fast Fly setup, confirm you have all four components. The footprint replaces the tent floor, so it must be present.

Tips for a Good Fit

The C Bar 2 Footprint is designed to match the tent floor dimensions. When installed correctly, it should lie flat with no wrinkles or bunching. If the footprint extends beyond the tent's outline, rainwater can pool between the footprint and floor. If it's too small, the tent edges are unprotected. Always stake the footprint before pitching the tent for the best alignment.