Quick answer
Frame Flowering Trees wallpaper as art by cutting a panel with a generous border, mounting it flat to an acid-free board, and hanging it in a frame with a mat or spacer so the paper never touches glass. Work on a clean, flat surface and let the mounted panel dry under weight before framing.
Choose a frame and mount that protect the paper
Wallpaper is thinner and more absorbent than art paper. A frame with a mat or spacer keeps the surface off the glass, and an acid-free backing board reduces the risk of discolouration over time. Avoid clamping the paper directly under tight frame clips; it can leave dents that never relax.
Match panel size to the repeat and the room
The Flowering Trees design includes a robin, floating white blossoms, blue flowers, bees and a nest of blue eggs. Decide which motif you want centred before you cut. A panel that is too tall for the wall can make a small room feel cramped; a wide panel over a sofa or change table usually reads better than a narrow strip.
Know when to choose a professional framer
If the panel is larger than about A2 or you want museum glass, a framer can cut a mat to the exact motif and supply conservation mounting. For smaller panels, a ready-made frame with an acid-free mat is a practical option. The trade-off is cost versus control: DIY is cheaper but less forgiving of a crooked cut.
Steps to frame and hang your wallpaper panel
- Measure the wall and choose the panel size: Decide where the frame will hang and measure the available width and height, allowing at least 5 cm of breathing space on each side. Cut the wallpaper panel 3–5 cm larger than the frame opening on every side so you can trim it cleanly later. Check the panel against the wall with painter's tape before cutting; a size that looks right on the floor can overwhelm a narrow wall.
- Cut the panel on a clean, flat surface: Lay the wallpaper face down on a cutting mat. Use a metal ruler and a fresh blade, and cut with one firm pass rather than several light ones. Wipe the blade between cuts if the backing sheds fibres. A dull blade tears the surface; change it before you start, not after the first ragged edge.
- Mount the panel flat to an acid-free board: Apply a thin, even line of acid-free adhesive around the outer 1 cm of the panel's back, then press it onto the mounting board. Smooth from the centre outwards with a clean, dry roller or the edge of your hand. Place a clean weight on top and leave it flat until fully dry. Do not apply adhesive to the centre of the panel; trapped moisture there is a common cause of bubbling.
- Trim the mounted panel to the frame opening: Once dry, turn the mounted panel face down and trim the excess border with a sharp blade against a metal ruler. Test-fit it in the frame before adding the backing. The panel should drop in without force. If the panel bows, it is not fully dry; return it under weight rather than forcing it into the frame.
- Assemble the frame with a mat or spacer: Place the mounted panel behind a mat or small spacer, then fit the backing board and secure the frame clips. Do not overtighten the clips. For a ready-made frame, check that the supplied backing is acid-free; if not, add an acid-free board between the panel and the backing. Shake the frame gently; a rattle means the panel is loose and will shift on the wall.
- Hang the frame level and secure: Use a spirit level to mark the hanging point, and choose a hook rated for the frame's weight. For plasterboard, use a wall plug or a picture hook designed for the load. Hang the frame so the centre of the panel sits at eye level or slightly above. Press gently on the top corners after hanging; any movement means the hook or cord needs adjusting.
Product facts
-
Flowering Trees Wallpaper: Flowering Trees wallpaper by Bespoke Letterpress features an illustrated robin, white floating blossoms, blue flowers, bees and a nest of blue Robin eggs in a soft, delicate palette. The detailed motifs reward a panel that is centred deliberately rather than cut to a random length.
Flowering Trees Wallpaper
