Quick Answer

Install the 23x6 sisal pole by aligning the M8 screw holes with your cat tree's matching screw points and tightening securely. Verify the original pole's thickness and screw size before you begin.

Why the M8 Screw Size Matters

The 23x6 sisal pole uses M8 screws at both the top and bottom. This is a common size for Cat Tree King cat trees, but it is not universal. Before you start, confirm that your existing cat tree has the same screw size and pole thickness. If the sizes do not match, the pole will not attach securely and could become a safety hazard for your cat.

The pole's 6-inch diameter is another factor. It is designed to fit cat trees that originally use a 6-inch thick pole. If your tree uses a different diameter, the pole may not align with the mounting points.

Preparing Your Workspace and Tools

Gather a Phillips or flathead screwdriver (depending on your screws), a spirit level, and a soft cloth to protect the pole's surface. Clear the area around the cat tree so you can move freely and avoid scratching the floor or nearby furniture.

If you are replacing an old pole, remove it first. Unscrew the top and bottom screws, then gently pull the pole away. Keep the screws in a safe place—you will reuse them if they are in good condition.

Step-by-Step Installation Guide

  1. Check compatibility: Confirm your cat tree's original pole has the same thickness (6 inch) and screw size (M8). If not, do not proceed—you will need a different pole size. Mismatched sizes can cause instability.
  2. Remove the old pole: Unscrew the top and bottom screws from the existing pole. Gently pull the pole away from the tree. Keep the screws if they are in good condition. Inspect screws for wear; replace if stripped.
  3. Position the new pole: Align the M8 screw holes at the top and bottom of the 23x6 sisal pole with the corresponding holes on the cat tree. Use a spirit level to ensure the pole is perfectly vertical. A tilted pole can stress the screws and cause loosening.
  4. Tighten the screws: Insert the screws and tighten them alternately—first top, then bottom—to distribute pressure evenly. Do not over-tighten, as this can strip the threads. Check tightness after a few days of use.
  5. Test the stability: Gently push the pole from different angles to ensure it does not wobble. If it moves, re-tighten the screws or check alignment. A stable pole encourages safe scratching.

Product Facts

  • Sisal Pole 23 inch x 6 inchØ - M8 (Blackline): This sisal pole has 1 M8 screw hole at the bottom and 1 at the top, a 6 inch diameter, and is 23 inch long. The matching M8 screw holes ensure a secure fit on compatible Cat Tree King cat trees, preventing wobble and extending the life of your cat tree.

    Sisal Pole 23 inch x 6 inchØ - M8 (Blackline)

    Sisal Pole 23 inch x 6 inchØ - M8 (Blackline)