Quick answer

Install your full-coverage garage door sensor by choosing the right bracket, positioning it for full coverage, and completing a simple alignment and test process. This prevents door hits and adds a critical safety layer.

Choosing the right bracket

Before you start, make sure you have the correct bracket for your door. The standard bracket fits most garage doors, but if your door is hurricane-rated, you may need the long/adjustable version. If you have limited clearance, the short bracket might be the better choice. Refer to the manufacturer's guide to confirm compatibility before purchasing.

Why full coverage matters

Traditional sensors only detect objects directly in their path. A full-coverage sensor uses an array of beams to monitor the entire door opening, catching obstacles near the edges or at unusual heights. This reduces the risk of damage to your vehicle, tools, or other items stored in the garage.

Installation steps

  1. Prepare your tools and bracket: Gather a drill, screwdriver, level, and the appropriate bracket for your door type. Confirm you have the standard, long/adjustable, or short bracket as needed. Check bracket compatibility before drilling any holes.
  2. Mount the sensor: Position the sensor on the garage floor or wall near the door opening, ensuring it is level and aligned with the door's path. Use the included mounting hardware to secure it firmly. Use a level to avoid misalignment that can cause false triggers.
  3. Connect power and test: Plug in the sensor and power it on. Open and close the garage door while observing the sensor's indicator lights. Confirm that the sensor detects obstacles and stops the door as expected. Test with a small object to verify detection before relying on it.

Product spotlight