Quick Answer
To install a Quick Ship wall sconce safely, always turn off the circuit breaker, verify power is off with a voltage tester, and follow the manufacturer's mounting and wiring instructions for your specific fixture.
Why Quick Ship Sconces Are Different
Quick Ship wall sconces are ready to ship quickly, but they still require careful installation. The Molto Wall Sconce, for example, can be installed pointing upward or downward, so you need to decide the orientation before mounting. The Arc Wall Lamp has a dramatic over-scaled design that may need extra support or a second person during installation.
Because these fixtures come in pre-set finishes, the installation process is the same as any hardwired sconce, but the weight and shape can vary. Always check the product's weight and dimensions before starting.
Tools and Safety Gear
Gather a voltage tester, screwdriver, wire strippers, drill, level, and safety glasses. If your wall is drywall, use anchors rated for the fixture's weight. For heavy sconces like the Arc Wall Lamp, consider a stud finder to locate a secure mounting point.
Step-by-Step Installation Process
- Turn off power at the circuit breaker: Locate the correct breaker and switch it off. Use a voltage tester on the existing wires to confirm no power is flowing. Never skip the voltage test—even if you think the breaker is off.
- Remove the old fixture and prepare the wires: Unscrew the old sconce and disconnect the wires. Straighten the existing wires and strip about 1/2 inch of insulation if needed. Check the wire condition; if frayed, cut back to clean copper.
- Install the mounting bracket: Attach the mounting bracket to the electrical box using the provided screws. For heavy sconces, verify the box is securely anchored to a stud. If the box is loose, tighten it or reinforce with a brace before continuing.
- Connect the wires: Match the fixture wires to the house wires: black to black (hot), white to white (neutral), and ground to ground. Use wire nuts and wrap with electrical tape for a secure connection. Double-check that no bare copper is exposed outside the wire nuts.
- Mount the sconce: Align the sconce base with the bracket and screw it in place. For the Molto, choose the upward or downward direction now. For the Arc, have a helper hold the lamp while you secure it. Ensure the sconce is level before tightening fully.
- Install the bulbs and test: Screw in the recommended bulbs (check the fixture label for wattage and type). Turn the breaker back on and flip the switch to test. If it doesn't work, turn off power and recheck your wire connections.
Products Mentioned
-
Quick Ship Molto Wall Sconce: The Molto Wall Sconce features a spun metal mesh shade and can be installed either upward or downward. Decide the direction before mounting because the wiring and shade orientation affect the final look and light direction.
Quick Ship Molto Wall Sconce
-
Quick Ship Arc Wall Lamp: The Arc Wall Lamp is a dramatically over-scaled study in clean lines and simple forms. Its larger size means you may need extra support and a second person to hold it while wiring.
Quick Ship Arc Wall Lamp