Quick answer
Install the Ground Mount for your Classic Series retractable hose reel on concrete, timber decking, or tiled floors using the included hardware. This optional extra provides a stable footing when you don't have a wall or post to mount the bracket.
Why choose a ground mount over wall mounting
A wall-mounted hose reel bracket is the most common setup, but not every garden has a suitable wall or sturdy post. The Ground Mount solves that by letting you place the reel on a flat, level surface such as a concrete slab, timber deck, or tiled patio. It also gives you flexibility to move the reel to a different spot later without patching holes in your wall.
Important compatibility note
The Ground Mount is designed specifically for the Classic Series retractable hose reels. It is not compatible with the Evolve Series. Double-check your reel model before purchasing to avoid returns.
Step-by-step installation
- Choose and prepare the mounting surface: Select a flat, level area on concrete, timber decking, or tiled floor. Clear away debris and ensure the surface is dry. Mark the four mounting holes using the Ground Mount bracket as a template. Avoid uneven or sloped surfaces; the reel must sit level to retract properly.
- Drill pilot holes: Use a masonry drill bit for concrete or a wood bit for timber. Drill holes at the marked spots. For tiles, use a tile bit and drill slowly to prevent cracking. Wear safety glasses and use a vacuum to clean dust from the holes before inserting anchors.
- Insert wall plugs (if needed): For concrete or tile surfaces, tap plastic wall plugs into the drilled holes until flush. On timber decking, you may skip plugs if using the supplied wood screws. Choose plugs that match your screw size; too loose and the mount will wobble.
- Attach the Ground Mount bracket: Position the bracket over the holes and drive the screws through the bracket into the plugs or timber. Tighten evenly with a screwdriver or drill until snug—do not overtighten. Overtightening can crack tiles or strip the screw threads in timber.
- Mount the hose reel onto the bracket: Align the Classic Series retractable hose reel's bracket with the Ground Mount bracket. Slide it down until it locks into place. Give it a gentle tug to confirm it is secure. If the reel doesn't lock, check that the bracket is level; re-adjust the screws slightly if needed.
- Test the reel operation: Pull out a few feet of hose and let it retract slowly. Watch for any binding or tilting. If the reel wobbles, tighten the mounting screws or reposition on a more level spot. A stable mount prevents the reel from tipping during retraction, which can damage the hose or mechanism.
Product facts
-
Ground Mount | Classic Series: The Ground Mount is an optional extra for the Classic Series retractable hose reels, suitable for concrete, timber decking, and tiled floors. It gives you a safe, secure way to hold your hose reel when you lack a wall or post, without sacrificing stability.
Ground Mount | Classic Series
