Quick answer
Mount your Sebra wall-mounted changing table securely by first checking your wall type, using appropriate anchors, and following the step-by-step assembly process below.
Before you start: wall type matters
Sebra wall-mounted changing tables are designed for solid walls (concrete, brick, or timber studs). Drywall alone cannot support the weight of the table plus your baby. If you have plasterboard walls, you must locate the wooden studs behind it and screw directly into them using heavy-duty toggle bolts or similar anchors rated for at least 50 kg.
Tools and hardware you will need
Gather a drill, appropriate drill bits for your wall material, a spirit level, a tape measure, a pencil, and the mounting brackets and screws supplied with your Sebra table. Do not substitute screws: use only the hardware provided or consult Sebra for replacements if any piece is missing.
Step-by-step installation guide
- 1. Mark the mounting height: Hold the changing table against the wall at a comfortable height (typically 90 cm from floor to tabletop). Use a spirit level to ensure it is straight, then mark the bracket positions with a pencil. Double-check the height before drilling — once holes are made, moving them is difficult.
- 2. Drill pilot holes: Using a drill bit suitable for your wall type, drill pilot holes at the marked positions. For concrete or brick, use a masonry bit. For timber studs, use a wood bit. Drill to the depth recommended for your wall anchors. Drilling too shallow or too deep can weaken the hold. Stop when the anchor fits flush with the wall surface.
- 3. Insert wall anchors: Tap the appropriate wall anchors into the pilot holes until they are flush with the wall. For hollow walls with studs, use toggle bolts that expand behind the surface. Never skip anchors on drywall — screws alone will pull out under load.
- 4. Attach the mounting brackets: Screw the mounting brackets securely into the anchors using the supplied screws. Tighten firmly but avoid over-tightening, which can strip the threads or damage the bracket. Check that both brackets are level with each other before moving on.
- 5. Hang the changing table: Lift the changing table and align its rear slots with the mounted brackets. Lower it gently until it clicks or sits firmly in place. Give it a gentle tug to confirm it is locked. If the table wobbles, remove it and re-check bracket alignment — do not force it.
- 6. Final safety check: Apply downward pressure on the tabletop and side-to-side force to verify stability. Ensure all screws are tight and the table does not shift. Test with a light load before using with your baby. Perform this check every few months as screws can loosen over time.
Product facts
-
Væghængt puslebord - Sebra Care - Classic White: The Sebra wall-mounted changing table offers a space-saving solution for small rooms like bathrooms or bedrooms, with a light floating appearance. Its compact design makes it ideal for tight spaces, but proper wall mounting is essential to keep it stable and safe during use.
Væghængt puslebord - Sebra Care - Classic White