What the Click ISOFIX Is Designed to Do

The EzyDog Click ISOFIX Dog Seat Belt is an adjustable car restraint that connects your dog's harness to the ISOFIX anchor points built into most modern vehicles. These are the same metal loops used for child car seats, so you don't need to hunt for a seat belt buckle or latch hook. The restraint uses automotive-grade webbing that matches the look and strength of a standard seat belt, keeping the back seat tidy.

This setup is meant to prevent driver distraction by keeping your dog in one position. It can also be used in the cargo area if your vehicle has ISOFIX ports back there. Before buying, check the location of your car's ISOFIX connections to make sure the restraint will reach from the anchor to your dog's harness attachment point.

Click ISOFIX at a Glance

  • Click™ ISOFIX: The Click ISOFIX Dog Seat Belt from EzyDog is an adjustable dog car restraint that clicks into the ISOFIX connection port of your car. No threading through seat belts or searching for clips. The ISOFIX connection is a one-click attachment to a dedicated anchor point.

    Click™ ISOFIX

    Click™ ISOFIX

  • Click™ ISOFIX: The Click ISOFIX Restraint uses the same style of webbing used on a car seat belt, so is tough, strong and won't look out of place in the back seat of your vehicle. The webbing is designed for automotive safety standards and blends in with your car's interior.

  • Click™ ISOFIX: Available in two lengths: Standard (17-26") and Cargo (24-40"), both in black. Choose the Standard length for most passenger seats and the Cargo length if your ISOFIX anchors are farther from your dog's harness, such as in a cargo area or large SUV.

Installing the Click ISOFIX Restraint

The installation takes under a minute and requires no tools. You only need your dog's harness and the Click ISOFIX restraint.

  1. Locate your car's ISOFIX ports: ISOFIX anchors are usually found at the base of the rear seat, between the seat back and the seat cushion. Look for small metal loops or plastic guides marked with the ISOFIX symbol. Check your vehicle manual if you're unsure.
  2. Attach the Clip to the ISOFIX Socket: Press the clip on the Click ISOFIX restraint onto the ISOFIX anchor until you hear a click. The connection is secure when the clip is fully engaged.
  3. Attach the other end to your dog's harness: Clip the restraint's second connector to the D-ring or attachment point on your dog's harness. Make sure the clip is fully closed and locked.
  4. Adjust the length for a snug fit: Slide the adjuster to shorten or lengthen the webbing so your dog can sit or lie down comfortably but cannot move forward into the front seats or climb between seats. The restraint should be taut enough to limit movement without pulling on your dog's harness.

Using the Restraint Safely

The Click ISOFIX is designed to work with a harness, not a collar. A neck collar can cause injury in a sudden stop. Always use a well-fitting harness that your dog cannot slip out of. Check the harness attachment point before each trip to ensure the clip is secure. The restraint itself does not replace a crash-tested harness; it is a tether that connects your dog's harness to the car's structure.

Dog safety is the primary goal of all EzyDog travel products. The Click ISOFIX keeps your dog in one position, which reduces distraction for the driver and prevents your dog from being thrown forward during braking. For the best protection, pair the Click ISOFIX with a harness that has been tested for car travel.

What the Supplied Information Does Not Cover

The supplied facts do not include crash-test data, weight limits, or specific vehicle compatibility lists. The manufacturer recommends checking your car's ISOFIX connection positions before ordering. If your car does not have ISOFIX anchors, the Click ISOFIX cannot be installed. For vehicles without ISOFIX, consider a seat belt–based restraint that clips into the standard buckle.