Quick answer
Mount the fork and rear sensors, install the controller battery, and connect the charging dock to keep your FOX LIVE VALVE NEO system powered.
Before You Start
The FOX LIVE VALVE NEO Kit is designed for bikes with compatible FOX suspension. Ensure your fork and frame have the necessary mounting points for the sensors and controller battery.
You will need a 4mm hex wrench, a torque wrench, and a small Phillips screwdriver. Work in a clean area to avoid dirt on the sensor contacts.
Installation Steps
- Mount the Fork Sensor: Use the M6x20mm bolt for standard rotors or M6x42mm bolt for oversized rotors. Attach the fork sensor to the lower fork leg using a 4mm hex wrench. Torque to 6 Nm. Common mistake: using the wrong bolt length can damage the sensor or rotor clearance.
- Mount the Rear Sensor: Attach the rear sensor to the chainstay using the appropriate bolt. Ensure the sensor cable is routed away from the chain and moving parts. Check that the sensor cable does not rub against the frame or spokes when the suspension compresses.
- Install the Controller Battery: Slide the rechargeable controller battery into the battery block and secure it with the cover. Mount the battery block to the frame using the provided zip ties or bracket. Make sure the battery block is oriented so the charging port is accessible.
- Insert Sensor Batteries: Open the battery compartments on the fork and rear sensors. Insert the included CR2032 batteries with the positive side facing up. Close and seal the compartments. A common mistake is inserting the battery upside down – the sensor will not power on.
- Charge the Controller Battery: Connect the charging dock to the controller battery using the USB-A to USB-C cable. Plug the USB-A end into a standard USB power adapter (not included). The LED will indicate charging status. Full charge takes about 1.5 hours. Avoid overcharging – the LED turns solid green when complete.
- Test the System: Turn on the controller battery and activate the sensors. Check that the fork and rear sensors communicate with the controller. Adjust sensor positions if needed. If the sensors do not sync, verify battery polarity and that the controller battery is fully charged.
Product Facts
-
FOX LIVE VALVE NEO KIT: The Live Valve Neo kit includes one rechargeable Controller battery with cover, one Fork Sensor, one Rear Sensor, a FOX battery block, a charging dock with USB-A to USB-C cable, and mounting hardware. You get everything needed for a full electronic suspension upgrade in one box, including CR2032 batteries for the sensors.
FOX LIVE VALVE NEO KIT
-
FOX NEO CHARGER AND CABLE: Time for full charge is approximately 1.5 hours. Single LED with multi-color indicator. The optional NEO Charger and Cable lets you charge the controller battery quickly and monitor its status with a simple LED.
FOX NEO CHARGER AND CABLE

