What This Guide Covers

The G-Craft MGSD Aerial LED Kit is designed to add a striking illuminated effect to your MGSD Aerial model. This guide explains what the kit includes, how to check compatibility, and what to keep in mind during installation. Since the kit is currently scheduled for a delayed release with the date to be announced, this article helps you prepare for when it becomes available.

Kit Facts That Affect Your Installation Plan

  • G-Craft MGSD Aerial LED Kit: This item includes only the LED components; the MGSD Aerial model kit itself is not included. You must have the MGSD Aerial model kit separately to install the LEDs. The LED kit does not come with the model.

    G-Craft MGSD Aerial LED Kit

    G-Craft MGSD Aerial LED Kit

  • G-Craft MGSD Aerial LED Kit: Specifically designed for the MGSD Aerial model kit. The LED components are shaped and sized to fit the MGSD Aerial. They may not work with other model kits without modification.

  • G-Craft MGSD Aerial LED Kit: Compatible with the MGSD Aerial (sold separately). Double-check that you have the correct MGSD Aerial kit before ordering. The LED kit is not a universal accessory.

  • G-Craft MGSD Aerial LED Kit: From G-Craft, a trusted name in model accessories. G-Craft is known for quality model add-ons, giving confidence in fit and finish for this dedicated LED set.

Preparing for Installation

Before you begin, make sure you have the MGSD Aerial model kit built or ready for assembly. The LED kit is meant to be installed during the build or as an upgrade after completion. Since the supplied information does not include step-by-step wiring instructions, you will need to refer to the LED kit's own manual when it ships.

  1. Confirm Compatibility: Verify that you own the MGSD Aerial model kit. The G-Craft LED kit is designed exclusively for this kit and will not fit other models without modification.
  2. Check the Contents: The LED kit includes only the LED components. No model parts, adhesives, or tools are included. Plan to have basic modeling tools like tweezers, side cutters, and possibly a small screwdriver on hand.
  3. Review the LED Kit Manual: Once the kit arrives, read the included instructions carefully. They will show where each LED goes and how to route the wiring inside the MGSD Aerial. The supplied product information does not contain these specific wiring steps, so rely on the manual that comes with the kit.
  4. Plan Your Build Order: If you are installing the LEDs during an initial build, follow the MGSD Aerial manual and insert the LED components at the points indicated by the LED kit instructions. For an existing built model, you may need to disassemble parts to access the internal cavities.

Installation Tips for a Clean Look

When installing the G-Craft MGSD Aerial LED Kit, take your time with wire routing to keep the build looking clean. Tuck wires into channels or behind armor pieces where possible. Test the LEDs before fully closing up the model to ensure all connections are secure. Because the kit is designed specifically for the MGSD Aerial, the fit should be precise, but gentle handling of the LED components is recommended to avoid damage.

What the Supplied Information Does Not Confirm

The product information does not include specific wiring diagrams, battery requirements, or switch placement details. These will be provided with the kit when it ships. Also, the release date is currently delayed and to be announced. For the most accurate and complete instructions, wait for the official product manual.