Start with the Right Light for Your Space

Before you pick up a screwdriver, confirm that your chosen wall light suits the room. The Small Opal Glass Double Arm Wall Light from Spark & Bell is available with an IP20 or IP44 rating. IP20 is for dry indoor areas like living rooms and bedrooms. IP44 adds splash protection, making it suitable for bathrooms or kitchens, provided the light is placed outside Zone 1 or 2. The finish options include Oak & Pink, Blackened Oak & Black, Oak & Oyster White, Spalted & Reed Green, Walnut & Reed Green, and Walnut & Dark Navy. Choose the finish and IP rating that match your decor and room conditions.

Step-by-Step Installation

The following steps assume you have a suitable junction box and have isolated the circuit at the consumer unit. If you are not confident working with mains wiring, hire a qualified electrician.

  1. Prepare the mounting surface: Mark the desired position for the wall light. Use a stud finder to locate a solid fixing point. For a double arm wall light, you need a secure anchor because the fixture has some weight and leverage. Drill pilot holes and insert wall plugs appropriate for your wall type.
  2. Connect the wiring: The light comes with a standard UK mains cable. Connect the live (brown), neutral (blue), and earth (green/yellow) wires to the corresponding wires in your junction box. Use appropriate connectors and ensure the earth connection is secure. Tuck the wires neatly into the back box.
  3. Mount the backplate: Align the backplate over the wall plate and secure it with the provided screws. Ensure the plate is level and flush against the wall. Tighten the screws evenly to avoid cracking the hardwood.
  4. Attach the arms and shades: The small opal glass shades slide over the bulb holders. Fit the bulbs (not supplied) and gently push the shades into place. The opal glass emits a soft, diffused glow. Do not overtighten any retaining rings or screws.
  5. Test and adjust: Restore power and switch on. Check that both arms operate correctly and the light is evenly distributed. If the light is not level, loosen the backplate screws slightly, adjust, and retighten.

What the Catalog Confirms About This Wall Light

  • Small Opal Glass Double Arm Wall Light - Hardwood: The Small Opal Glass Double Arm Wall Light is available in multiple finishes, including Oak & Pink, Blackened Oak & Black, and Walnut & Dark Navy. Finish choice affects how the light blends with your existing decor and influences the overall aesthetic.

    Small Opal Glass Double Arm Wall Light - Hardwood

    Small Opal Glass Double Arm Wall Light - Hardwood

  • Small Opal Glass Double Arm Wall Light - Hardwood: The light is offered with IP20 or IP44 ratings. IP44 is essential for installation in bathrooms or kitchens where moisture may be present. IP20 is sufficient for dry living spaces.

  • Small Opal Glass Double Arm Wall Light - Hardwood: The design takes inspiration from 1920s styling and emits a soft glow through opal shades. The opal glass creates a warm, ambient light rather than a harsh direct beam, making it ideal for hallways, reading nooks, or above a bedside table.

What the Catalog Does Not Settle

The supplied product records do not include specific instructions for cable length, exact fixing screw sizes, or recommended bulb type and maximum wattage. For these details, refer to the manufacturer’s packaging or contact Spark & Bell directly. Always use bulbs that are compatible with the fixture and your local electrical regulations.