What the Jelly Forged Carbon Set Includes

The Jelly Forged Carbon Textured 126 Keycap Set from XVX arrives as a full 126-key set, which covers a standard full-size keyboard layout including the number row, modifiers, and a numpad. The keycaps have a white, textured forged-carbon-style finish. Before you start, confirm your keyboard uses a standard MX-style stem (the cross-shaped stem that keycaps press onto). This set is not confirmed to fit non-standard layouts like low-profile or laptop-style switches.

Installation Steps

These steps assume you have a mechanical keyboard with exposed switch stems and a keycap puller (or a flat tool) to remove existing keycaps.

  1. Remove existing keycaps: Use a wire keycap puller or gently pry from the bottom edge with a flat plastic tool. Work slowly to avoid bending the switch stems. Set the old keycaps aside if you plan to reuse them.
  2. Lay out the new keycaps: The 126-key set includes caps for all standard rows. Arrange them roughly in rows on a clean surface. The white forged-carbon texture is uniform, so there is no directional grain to match. Check that each cap’s stem cross aligns with your switch.
  3. Press each keycap onto its switch: Align the keycap’s cross-shaped recess with the switch stem and press straight down until it clicks or sits flush. Do not force at an angle. If a cap feels loose, it may be a non-standard switch; the set is designed for typical MX stems.
  4. Test all keys for smooth operation: Press each key a few times to confirm it returns freely and does not bind on adjacent caps. The textured surface may feel slightly different from smooth caps, but the travel should be unchanged.

Keycap Set Details from the Catalog

  • Jelly Forged Carbon Textured 126 Keycap Set [White]: The Jelly Forged Carbon Textured 126 Keycap Set from XVX is a white keycap set with a textured, forged-carbon-style look. It is offered as a 126-key set, giving broad coverage for a full-size keyboard layout. The 126-key count means you can replace every cap on a standard full-size board without needing extra caps. The white forged-carbon texture is purely cosmetic; it does not affect stem compatibility.

    Jelly Forged Carbon Textured 126 Keycap Set White

    Jelly Forged Carbon Textured 126 Keycap Set [White]

What the Supplied Information Does Not Settle

The catalog does not specify the exact stem compatibility beyond the 126-key count. If your keyboard uses non-standard stems (e.g., Topre, Alps, or low-profile switches), the set may not fit. The same applies to split spacebars or unusual bottom-row layouts. Measure your switch stems before ordering if you are unsure. The set includes no stabilizer bars or extra spacers; it is a straightforward cap replacement kit.