Quick answer
To install the Original Boat Mount for your Turtlebox speaker, first choose a clean, flat surface on your boat, then suction the mount firmly, secure the speaker with the tie-down, and test the grip before heading out.
Why surface choice matters for your boat mount
The Original Boat Mount uses a suction mechanism, so the surface you attach it to is the most important factor in how well it holds. A smooth, non-porous surface like fiberglass or sealed plastic gives the suction cup the best seal. Avoid textured or heavily curved areas, as these can let air in and reduce grip.
If your boat has a rough or porous surface, the mount may not hold as securely. In that case, consider mounting to a smooth accessory like a tackle box or a flat console area instead. The mount is designed for versatility, so you can move it around to find the best spot.
Securing your speaker: Tie-down vs. suction only
The Original Boat Mount includes a tie-down strap to keep your Turtlebox speaker in place, even in rough water. While the suction cup alone can hold the mount, the tie-down adds a layer of security that prevents the speaker from bouncing off if you hit a wave.
Always use the tie-down when you're underway. It only takes a few seconds to fasten and gives you peace of mind that your speaker won't end up in the water.
Remember that the mount is designed for the Original speaker, including the Original Gen 3. It may not fit other speaker models, so check compatibility before purchasing.
Step-by-step installation
- Choose the mounting surface: Find a smooth, flat, non-porous area on your boat. Clean it with fresh water and dry it with a lint-free cloth to remove salt, dirt, or oils that could break the suction seal. A clean surface is the #1 factor in a strong hold. Skipping this step is the most common mistake.
- Position and press the suction mount: Place the suction cup against the surface and press firmly from the center outward to push out air. Engage the locking lever or twist mechanism if your mount has one to secure the vacuum. If the mount slides or feels loose, release and reposition—don't force it.
- Attach your Turtlebox speaker: Set your Original speaker onto the mount, aligning the mounting points. Use the tie-down strap to secure the speaker snugly, but avoid over-tightening which could damage the speaker or mount. Check that the speaker is centered and the strap is evenly tensioned.
- Test the mount before you go: Give the speaker a gentle tug to ensure the mount holds. If it moves, repeat steps 1-3. Once secure, enjoy your music on the water. Always test the mount before leaving the dock—it's easier to fix a loose mount on land than on the water.
Product facts
-
Original Boat Mount: Secure your Original speaker with our industrial-strength boat mount. Suction the mount anywhere, tie-down your speaker, and enjoy your music on the water! This mount is built specifically for the Original speaker, so you get a secure fit and easy setup without worrying about compatibility.
Original Boat Mount
-
Original (Gen 3): Rugged, portable speaker with premium sound. Engineered for the outdoors: IP-67 water, drop-, and crush-proof. 3-day battery life. The Original Gen 3 is built to handle the elements, so once it's mounted, you can enjoy music worry-free even in wet or bumpy conditions.
Original (Gen 3)