What the Stubborn Dog In-Ground Fence Includes

The PetSafe Stubborn Dog In-Ground Fence is a do-it-yourself weekend project designed for most yard shapes and sizes. The kit includes a transmitter with power adaptor, a receiver collar, 500 feet of wire, 50 training flags, waterproof splice capsules, wire connectors, contact points for short or long-haired dogs, a test light tool, and a surge protector. With the included wire you can contain up to 1/3 acre; you can expand coverage to up to 25 acres by purchasing additional wire.

Install the Boundary Wire

  1. Plan the layout: Map out the boundary line around your yard. The wire must form a single continuous loop that returns to the transmitter. Avoid sharp bends that could kink the wire.
  2. Bury or stake the wire: You can bury the wire underground or secure it above ground with landscape staples. The supplied 500 feet of wire is enough for a 1/3-acre boundary. Follow the product instructions for proper burial depth.
  3. Splice if needed: Use the included waterproof splice capsules and wire connectors to join wire sections. For larger yards, purchase additional compatible wire (available separately).
  4. Connect to the transmitter: Strip the ends of the wire and connect them to the transmitter terminals. Plug the transmitter into a power outlet via the surge protector.

Set Up the Receiver Collar

  1. Fit the collar: The receiver collar fits dogs weighing 8 pounds or more, with neck sizes from 6 to 28 inches. Center the contact points against the dog's skin, then tighten until you can slide two fingers between the collar and the neck.
  2. Select contact points: Use the short contact points for short-haired dogs and the long contact points for long-haired dogs. This ensures consistent contact with the skin.
  3. Insert the battery: The collar uses a PetSafe 9V alkaline battery. Slide the battery into the compartment and secure the cover.
  4. Choose correction level: The collar offers 4 levels of adjustable static correction plus a tone and vibration mode. Start at the lowest level and increase only if your dog does not respond. The vibration mode is also helpful for hearing-impaired pets.

Training Your Dog to the Boundary

With about two weeks of training, your dog will learn to stay inside the safe area. Walk your dog on a leash along the flagged boundary line. The collar will emit a tone and vibration when your dog approaches the boundary. If they attempt to cross, the static correction level increases to encourage them to stay inside. The system includes over-correction protection: if your dog remains in the correction zone for 30 seconds, the static correction automatically shuts off to prevent overstimulation.

Expand the System for Multiple Pets

If you have more than one dog, you can purchase additional compatible receiver collars (except YardMax models) so all your pets can use the same in-ground fence. Each additional collar must be paired with the same transmitter and fitted individually.

Key Specifications at a Glance