Start with a compatible tipi and a raised platform

The Golv 15 Comfort floor is designed for a tipi of the same size (15). The supplied catalog confirms that this particular floor was previously used for about two weeks in a tent tipi that stood on a raised wooden platform. If you have a raised platform, the floor's underside stays cleaner and the setup is more straightforward. On bare ground, expect more dirt and moisture under the floor, and plan to clean and dry the floor thoroughly after each use.

What the catalog tells us about this floor

  • Golv 15 Comfort 88946: The Golv 15 Comfort floor is a used item (serial number 88946). The top side (black) is in spotless like-new condition. The underside has some dirt, mainly along and around the long zipper, plus a few small dark marks on a small section of the floor surface. Knowing the floor's condition helps you decide whether to clean it before installation, and where to expect minor blemishes that won't affect function.

    Golv 15 Comfort 88946

    Golv 15 Comfort 88946

  • Golv 15 Comfort 88946: The floor was previously mounted in a tent tipi that stood on a raised wooden platform. If you also use a raised platform, the floor will sit flat and stay cleaner. If you place it directly on the ground, be prepared for more dirt and possible moisture underneath.

Fitting the Golv 15 Comfort floor

The following steps are based on the supplied product facts. No assembly instructions were provided, so these are general guidelines for fitting a large tipi floor.

  1. 1. Prepare your tipi area: Clear the ground of sharp objects, stones, and debris. If you have a raised wooden platform, ensure it is level and free of protruding nails or splinters.
  2. 2. Unfold and inspect the floor: Lay the Golv 15 Comfort floor flat. Check the top (black) side for any marks – the catalog states it is spotless. Inspect the underside for dirt along the zipper and small dark marks. Decide if you want to wipe the zipper area before installation.
  3. 3. Position the floor inside the tipi: Center the floor within the tipi footprint. The long zipper should be accessible for opening the floor if needed. Make sure the floor lies flat without wrinkles that could collect moisture.
  4. 4. Secure the floor (if applicable): Some tipi floors have attachment points or loops. The catalog does not specify if this floor has them. If your floor has no loops, you may place heavy objects (like gear or the tipi's own weight) on the edges to keep it in place.
  5. 5. After use: clean and dry: The catalog notes the floor is used but functional. After each use, wipe the top side clean. Pay special attention to the zipper area on the underside, where dirt can accumulate. Let the floor dry completely before storing to prevent mold or odors.