Quick answer
Installing the Mokee toddler safety rail on your Midi Cot Bed is a straightforward process that takes about 15 minutes. You only need the included kit and a screwdriver.
Before you start: check compatibility
The Mokee Midi Cot Bed (140x70) toddler safety rail conversion kit is designed specifically for the Midi Cot Bed frame. It will not fit other cot bed models or sizes. Confirm your cot bed model before purchasing.
The kit includes the safety rail, screws, and a hex key. You will need a Phillips head screwdriver (not included). Prepare a clean, flat workspace and have the cot bed mattress removed for easier access.
Installation steps
- 1. Remove the cot front panel: Using the Phillips screwdriver, unscrew and remove the front panel of the cot bed. Keep the screws in a safe place – you will reuse them later. Common mistake: Forgetting which screws go where. Take a photo before disassembly or label the screws.
- 2. Attach the safety rail brackets: Align the metal brackets from the conversion kit with the pre-drilled holes on the side of the cot bed frame. Secure them using the screws provided in the kit. Tighten firmly but do not overtighten. Check that the brackets are level and parallel to the floor before fully tightening.
- 3. Mount the safety rail: Slide the safety rail onto the brackets. It should click or lock into place. Ensure the rail is flush against the frame and does not wobble. If the rail feels loose, double-check that the brackets are correctly aligned and tightened.
- 4. Reattach the front panel (optional): If you want to keep the front panel for a more enclosed look, screw it back onto the frame using the original screws. The safety rail will now sit behind or beside it, depending on the design. Leaving the front panel off makes it easier for your child to get in and out independently.
- 5. Final safety check: Give the rail a firm shake from inside and outside the bed. Check all screws are tight and no sharp edges are exposed. Place the mattress back and test the rail height – it should be at least 2 inches above the mattress surface. Perform this check every few weeks as your child grows and the mattress may settle.
What you need
-
Midi Cot Bed (140x70) Toddler Safety Rail Conversion Kit - Beech: The Mokee Midi Cot bed toddler safety rail conversion kit easily attaches to the cot bed with a safety rail and screws, providing a protective barrier while still allowing them the independence to climb in and out on their own. This means you can safely transition your toddler to a bed without buying a separate toddler bed, saving space and money.
Midi Cot Bed (140x70) Toddler Safety Rail Conversion Kit - Beech
