Quick answer
Installing a Billetworkz transfer case knob on your Jeep takes about 10 minutes with basic hand tools. The key is matching the correct shape and color option to your model, then securing the set screw without over-tightening.
Why upgrade the transfer case knob?
Your Jeep's transfer case knob is one of the most-touched controls in the cabin, yet many stock knobs feel cheap or wear quickly. A CNC-machined metal knob from Billetworkz replaces that plastic or rubber part with a precision-machined piece that matches the rest of your interior upgrades.
The Billetworkz Transfer Case Knob is made from high-quality materials and finished with the same attention to detail as the rest of your setup. It transforms a commonly overlooked component into a statement piece without requiring any permanent modification.
Installation steps
- 1. Choose the right knob shape: Before starting, confirm your Jeep model and select the corresponding Transfer Case Knob Color and Shift Knob Shape combination. The Billetworkz knob is available in multiple shapes, so match it to the stock lever geometry. Check the shape option before ordering — a mismatch means the knob won't seat fully.
- 2. Remove the old knob: Pull the existing knob straight up and off the metal lever shaft. If it's stuck, twist gently while pulling. Do not use pliers on the lever — they can scratch or deform the shaft. If the old knob is stubborn, apply heat with a hair dryer to soften the plastic before pulling.
- 3. Clean the lever shaft: Wipe the metal lever with a dry cloth to remove dirt, grease, or old adhesive residue. A clean surface ensures the new knob slides on evenly and stays aligned. Skip this step and the knob may sit crooked or loosen over time.
- 4. Align and press the new knob: Line up the Billetworkz knob's internal shape with the lever's flat sides. Press down firmly until the knob sits flush against the lever base. Rotate to check alignment — the engraving or texture should face the driver. If it doesn't seat fully, you may have the wrong shape option. Do not force it.
- 5. Tighten the set screw: Most Billetworkz transfer case knobs use an internal set screw. Use the included hex wrench to tighten until snug. Over-tightening can strip the threads or crack the knob. Stop turning as soon as you feel resistance — a quarter turn past snug is too far.
- 6. Test the movement: Cycle the transfer case lever through 2H, 4H, N, and 4L to ensure the knob doesn't slip or bind. The knob should rotate with the lever without wobbling. If it slips, remove the knob, apply a drop of thread locker to the set screw, and retighten.
Product facts
-
Billetworkz Jeep Transfer Case Knob - Cosmic Space Standard Engraving: CNC-machined from high-quality materials and finished with the same attention to detail as the rest of your setup. This means the knob resists wear and feels solid in hand, unlike stock plastic knobs that can crack or fade over time.
Billetworkz Jeep Transfer Case Knob - Cosmic Space Standard Engraving