Quick Answer
Connect the Phoenix Jump Starter's clamps to your battery's positive and negative terminals, then start your car within 30 seconds. Always follow the safety order: positive first, negative second, and disconnect in reverse.
Why the Phoenix Jump Starter is a Safe Choice
The ToughTested Phoenix Jump Starter combines a 500A jump starter with a 150 PSI tire inflator and a 10W USB power bank, so it's ready for multiple roadside emergencies. Its 800A peak output provides enough cranking power for gas engines up to 6 cylinders, making it a versatile tool for most passenger cars.
Before you begin, ensure the Phoenix is fully charged. A partially charged unit may not deliver the needed peak current, and using it repeatedly without recharging can reduce its lifespan.
Important Safety Precautions
Always read the user manual before first use. Never use the jump starter on a damaged battery or in the presence of flammable gases. Keep the unit away from water and extreme heat.
If your car battery is cracked, leaking, or swollen, do not attempt a jump start. Instead, call for professional assistance. The Phoenix is not designed to charge a battery; it only provides a burst of power to start the engine.
Step-by-Step Jump Start Process
- Park and Prepare: Turn off your car, remove the keys, and put on safety gloves and goggles. Ensure the Phoenix is charged to at least 50% (check the LED indicator). A low charge may not provide enough power, so charge the unit fully before an emergency.
- Connect the Positive Clamp: Attach the red clamp to the positive (+) terminal of your car battery. Make sure the clamp is secure and not touching any metal parts. The red clamp must never touch the vehicle frame or the negative terminal—this can cause a short circuit.
- Connect the Negative Clamp: Attach the black clamp to a clean, unpainted metal part of the engine block or chassis, away from the battery and moving parts. Do not connect to the negative battery terminal directly. Connecting to the negative terminal can create sparks near battery gases; use a grounding point instead.
- Start Your Car: Turn on the Phoenix (if required) and attempt to start your car. If it doesn't start within 5-6 seconds, stop and wait 2-3 minutes before trying again. Repeated cranking without rest can overheat the jump starter; let it cool between attempts.
- Disconnect Safely: Once the engine runs, turn off the Phoenix and disconnect the clamps in reverse order: remove the black clamp first, then the red. Keep the engine running for at least 10 minutes to recharge the battery.
About the ToughTested Phoenix Jump Starter
-
ToughTested Phoenix Jump Starter, Tire Inflator & Power Bank Kit: The Phoenix Jump Starter delivers 800A peak output, enough to start gas engines up to 6 cylinders. This ensures reliable starting power for most standard passenger vehicles, even in cold conditions.
ToughTested Phoenix Jump Starter, Tire Inflator & Power Bank Kit
-
ToughTested Phoenix Jump Starter, Tire Inflator & Power Bank Kit: It includes a 150 PSI tire inflator with auto stop, which prevents over-inflation. After jump starting, you can safely inflate a low tire to the correct pressure without guesswork.
-
ToughTested Phoenix Jump Starter, Tire Inflator & Power Bank Kit: The built-in 10W USB charging port keeps your phone powered during an emergency. You can call for help or use navigation while waiting for assistance, without draining your car battery.