What You Need to Know Before You Start
The DS18 6.5" Universal Flat Mount Kick Panel Speaker Pod (available in Black, White, Red, and Carbon Fiber) is a do-it-yourself enclosure designed to fit most 6-inch speakers with the correct mounting depth and diameter. It comes as a pair of pods — no speakers or grills are included, so you supply your own 6.5" speakers. The pod's flat bottom surface bolts or screws down for a tight, firm fit on most flat surfaces, making it a versatile option for jet skis, Jeeps, motorcycles, and other vehicles.
Mounting the Pods Step by Step
The following steps are based on the pod's design and typical installation practices. Always refer to your specific vehicle and speaker instructions for torque specs and wiring details.
- Choose Your Mounting Location: Select a flat, clean surface on your vehicle — such as a kick panel, side panel, or dash area. The pod's flat base is designed to attach securely via bolts or screws.
- Position and Mark the Pod: Place the pod at your desired location and mark the screw or bolt holes through the base. Ensure the pod is level and that the speaker opening is unobstructed.
- Drill Pilot Holes (If Needed): For metal or fiberglass surfaces, drill small pilot holes at your marks. For plastic or wood, a screw may be sufficient without pre-drilling. Use appropriate hardware for your surface type.
- Secure the Pod: Bolt or screw the pod firmly to the surface. The flat mounting area ensures a tight fit. Do not overtighten, as this could crack the pod material.
- Install Your Speaker: Mount your chosen 6.5" speaker into the pod using the provided speaker screws (not included with the pod). Ensure the speaker has the correct mounting depth and diameter for a proper fit.
- Connect the RGB LED Wiring (If Applicable): If your pod includes RGB LED lights, connect the wiring to a suitable power source and ground as specified in the product instructions. Route wires neatly and secure them away from moving parts.
DSEN-JS6 / EN-CFJS6 Pod Specifications at a Glance
-
6.5” Universal Flat Mount Kick Panel Speaker Pod – Jet Skis, Jeeps, Motorcycles – RGB LED Lights: 6 inch style that fits most 6 inch speakers with the correct mounting depth and diameter for great fitment. Confirms that the pod is designed for standard 6.5" speakers, but you must verify your speaker's mounting depth and diameter before purchase.
6.5” Universal Flat Mount Kick Panel Speaker Pod – Jet Skis, Jeeps, Motorcycles – RGB LED Lights
-
6.5” Universal Flat Mount Kick Panel Speaker Pod – Jet Skis, Jeeps, Motorcycles – RGB LED Lights: On the bottom of the pod is a flat surface mounting area that bolts or screws down for a tight and firm fit. The flat base makes installation straightforward on any flat surface — no custom brackets needed for most jet ski or Jeep applications.
-
6.5” Universal Flat Mount Kick Panel Speaker Pod – Jet Skis, Jeeps, Motorcycles – RGB LED Lights: Comes in multiple colors: black, red, white, and carbon fiber. Choose a color that matches your vehicle's interior or exterior for a clean, integrated look.
Tips for a Clean Installation
Before drilling, test-fit the pod and speaker to ensure clearance behind the mounting surface. For marine environments (jet skis), use stainless steel hardware and seal any exposed screw holes with silicone to prevent water intrusion. On a Jeep, consider routing speaker wire through existing grommets or along the frame to keep the install tidy. The pod's RGB LED wiring should be connected to a switched power source so the lights turn off with the ignition, preventing battery drain.
