Quick Answer
To mount a Coronado Solarscope with the extra Mounting Base, attach the base securely to your tripod or mount, then align the Solarscope's dovetail and lock it in place. Always verify stability before viewing.
Why Use the Extra Mounting Base?
The extra Mounting Base for the Coronado Solarscope is designed for use with the Hutech Hinode Solar Guider. This setup allows you to attach the Solarscope to a mount that may already be occupied by another device, or to switch between scopes without disturbing your primary alignment.
Using the extra base simplifies the process of adding the Solarscope to your existing solar setup, saving time during setup and ensuring a secure connection.
Compatibility Considerations
Before you begin, confirm that your tripod or mount has a compatible dovetail receiver. The extra base is intended for use with the Hutech Hinode Solar Guider, so check that your mount's interface matches the base's connection type.
If you are unsure about compatibility, consult your mount's manual or contact the manufacturer. Using an incompatible base can lead to instability or damage.
Mounting Steps
- Prepare Your Mount: Ensure your tripod or mount is stable and level. Remove any existing dovetail plate or adapter from the mount's receiver. Check that the receiver is clean and free of debris before proceeding.
- Attach the Extra Mounting Base: Slide the extra Mounting Base into the mount's dovetail receiver. Tighten the locking knob or screw until the base is firmly held. Do not over-tighten, as this can strip threads. The base should not move when you gently push on it.
- Mount the Coronado Solarscope: Place the Solarscope's dovetail onto the extra base, aligning it properly. Secure it with the base's locking mechanism. Ensure the scope is oriented correctly for your observing session. Double-check that the Solarscope is securely locked before releasing your hold.
- Verify Stability and Alignment: Gently rock the scope to confirm there is no play. Adjust the mount's tension if needed. Verify that the Solarscope points toward the Sun safely and that any finder or guider is aligned. If anything feels loose, disassemble and re-tighten before use.
Product Fact
-
Mounting Base (extra) for Coronado Solarscope: This extra Mounting Base for Coronado Solarscope is intended to be used with the Hutech Hinode Solar Guider. This base lets you integrate the Solarscope into a Hutech-guided setup, ensuring a secure and compatible connection.
Mounting Base (extra) for Coronado Solarscope