Quick Answer

Use a 1/4 inch tree screw to mount your scouting camera directly to a tree. It is simple, adjustable, and causes no damage to the tree.

Why Choose a Tree Screw Over Straps or Nails?

Tree screws offer a more rigid mount than straps, which can sag or shift in wind. They also avoid the damage nails or spikes cause to the tree bark.

The BRAUN Baumschraube is designed for all BRAUN scouting cameras and any other brand with a standard 1/4 inch thread, making it a versatile choice.

Because the screw is 360° rotatable and tiltable, you can fine-tune the camera angle after installation—something a fixed strap mount doesn't easily allow.

Trade-Offs to Consider

A tree screw requires a tree with a trunk wide enough to hold the screw without splitting. Very thin or young trees are not suitable.

Unlike a strap, a tree screw leaves a small hole in the tree. While the screw is designed not to harm the tree, you should avoid using it on trees with thin bark or in protected areas.

If you plan to move the camera frequently, a tree screw takes a bit more effort to install than a strap, but the stability is worth it for long-term setups.

Step-by-Step Mounting Guide

  1. Choose the Right Tree: Select a tree with a trunk at least 15 cm in diameter and healthy bark. Avoid trees with thin bark or visible damage. Check that the tree is not in a protected area where drilling is prohibited.
  2. Position the Screw at the Right Height: Hold the tree screw against the tree at the height you want the camera. Typically, 1 to 2 meters above the ground works well for most trail camera uses. Ensure the area in front of the tree is clear of tall grass or branches that could block the camera's view.
  3. Screw the Tree Screw into the Trunk: Using a screwdriver or drill with the appropriate bit, turn the screw clockwise into the tree. Keep it perpendicular to the trunk to ensure a straight mount. Do not overtighten; the screw should be snug but not forced, to avoid splitting the bark.
  4. Attach the Camera: Screw the camera's 1/4 inch thread onto the tree screw. Make sure it is hand-tight, but avoid over-tightening which could strip the threads. Give the camera a gentle shake to confirm it is secure before leaving it.
  5. Adjust the Angle: Use the 360° rotation and tilt feature to aim the camera exactly at the desired area. Lock the position once you have the right angle. Test the camera's field of view by taking a test photo or using the live view if available.

Product Spotlight

  • BRAUN Baumschraube für Wildkameras 1/4": The BRAUN Baumschraube features a 3 cm screw that you simply turn into the tree trunk, and it is made of robust metal for long-lasting use in rough environments. This makes installation quick and secure, and the durable construction ensures your camera stays mounted even in harsh weather.

    BRAUN Baumschraube für Wildkameras 1/4"

    BRAUN Baumschraube für Wildkameras 1/4"