Quick answer
Pack a goblin bag of holding by layering from the bottom up: heavy metal dice first in a padded tray or pouch, then resin sets in individual bags, then minis and flat tools along the walls, and small loose dice last in a top pocket. Keep the bag under about two-thirds full so you can cinch it closed without stretching the seams.
goblin bag of holding
A goblin bag of holding looks like it can swallow your whole dice collection, but stuffing it without a plan is how you end up with scratched resin, cracked corners, and a 20-minute hunt for your d20. The goal is not to fill every cubic inch. It is to make every die findable and protected while the bag still closes comfortably.
This guide walks through a repeatable packing order you can use before game night, plus the checkpoints that keep heavy metal from grinding against softer dice. If you rotate sets often, the same steps work as a quick repack between sessions.
Start with an empty bag and sort dice by material and weight
Before anything goes back in, empty the bag completely and sort your dice into three piles: metal, resin or plastic, and small or loose pieces. Metal dice are the heaviest and should sit at the bottom, where they cannot fall onto softer dice. Resin sets go in the middle, and small loose dice or tokens go on top or in a side pocket.
This sort takes two minutes and prevents the most common packing mistake: mixing a heavy metal set with sharp-edge resin so the two grind together every time you move the bag. If you own a set like the Torched Rainbow 16mm Polyhedral Dice Set, treat it as a bottom-layer item because its solid zinc body carries real weight.
Torched Rainbow 16mm Polyhedral Dice Set
- Checkpoint: if you can hear metal clinking against plastic when you gently shake the closed bag, your layers are wrong.
Use individual pouches or trays for each set
Loose dice in a big bag settle into every gap and tangle with straps and drawstrings. Give each full set its own small pouch, or keep a padded dice tray at the bottom to catch the heaviest dice. A tray also gives you a ready rolling surface when you arrive, so you are not rolling metal dice directly on a table.
For mini sets, a single small pouch can hold several sets because 10mm dice take up far less room. The Ethereal Green 10mm Mini Polyhedral Dice Set and the Ethereal Light Purple 10mm Mini Polyhedral Dice Set each come with 7 dice (d4, d6, d8, d10, d10 (00-90), d12, and d20), and their small size makes them ideal for a dedicated pocket rather than the main compartment.
- Common mistake: overstuffing one pouch until the drawstring will not cinch. Split sets across two pouches instead.
Load the bag bottom-up: heavy, then medium, then light
Place padded trays and metal dice at the bottom, centered so weight sits over the base rather than against a seam. Add resin sets in their pouches on top, then fill the remaining gaps with soft items like cloth mats or small bags. Keep the top third of the bag for lightweight loose dice and tokens so the closure stays easy to reach.
If you carry a hollow metal set, it belongs in this bottom layer too, but it behaves differently from solid metal. Hollow Metal Gear Dice: Sterling Gray with Red Numbers is a full-sized 16mm polyhedral set of 7 dice, and because it is hollow it is lighter than solid metal while still looking and feeling metallic. That makes it a good bridge between your heavy bottom layer and your resin middle layer.
- Checkpoint: the bag should stand on its own when set down. If it slumps or bulges at the seams, remove one pouch.
Protect sharp edges and handcrafted finishes
Sharp-edge resin dice are not tumbled, so their edges stay crisp and their faces stay more precise than mass-produced resin. That precision is worth protecting. Keep these dice in their own soft pouch and avoid pressing them against metal or against each other with force. A handcrafted set like Hand Crafted Sharp Edge Dice: Turquoise Pebbles is infused with turquoise pebbles and hand polished, so a separate pouch keeps the finish looking the way it did out of the box.
If you want a visible set that still handles daily travel, a glitter-resin set can sit in the middle layer without much risk. Fancy Fae 16mm Poly Dice Set is made from transparent resins infused with prismatic glitter dust that shifts from blues to purples to greens in the light, and its 7-dice polyhedral layout fits the same pouch size as most standard sets.
- Common mistake: storing sharp-edge dice loose with keys, minis, or metal dice. Use a pouch even if it costs a little space.
Check capacity, then close and carry
A goblin bag of holding has a fixed volume, and dice bags lose usable space fast once pouches and trays go in. Aim to fill no more than two-thirds of the bag so the drawstring or flap closes without tension. If the bag will not close flat, you are over capacity, not under-organized.
Carry the bag by its handle or strap rather than by the drawstring, and set it down base-first so the heavy layer stays at the bottom. Before you leave for a session, do a quick shake test and a reach test: if you can find your d20 in a few seconds and hear no grinding, the pack is right.
- Checkpoint: leave one small empty pocket for a pencil, condition tracker, or a single loose die you use often.
Packing steps at a glance
- 1. Empty and sort by material: Pull everything out and make three piles: metal, resin or plastic, and small or loose pieces. Metal goes to the bottom layer, resin to the middle, and small pieces to the top or a side pocket. Checkpoint: no metal should share a pouch with resin.
- 2. Pouch each full set: Give every 7-dice polyhedral set its own small pouch or tray. Mini 10mm sets can share a pocket, but full 16mm sets should not be crammed together. Common mistake: one giant pouch for everything, which causes scratches and slow sorting.
- 3. Load heavy items first: Place padded trays and solid metal dice at the bottom, centered over the base. Add hollow metal and resin pouches above them, then fill gaps with soft cloth or flat items. Checkpoint: the bag should stand on its own and not bulge at the seams.
- 4. Keep sharp-edge and handcrafted dice separate: Sharp-edge resin and hand-polished sets get their own soft pouch in the middle layer, away from metal and loose minis. Checkpoint: no hard edges pressing directly against another die face.
- 5. Fill to two-thirds and test the close: Stop loading when the bag reaches about two-thirds full. Close it, shake gently, and listen for grinding. If it will not close flat, remove a pouch. Final check: you can reach your most-used die in a few seconds without emptying the bag.
Dice that fit this packing method
- Ethereal Green 10mm Mini Polyhedral Dice Set: At 10mm, these mini dice sets easily fit in your pocket, and each polyhedral set comes with 7 dice (d4, d6, d8, d10, d10 (00-90), d12, and d20). Small sets take up little room in a goblin bag, so they work well in a dedicated side pocket or as a backup set you can carry without repacking the main compartment.
- Ethereal Light Purple 10mm Mini Polyhedral Dice Set: At 10mm, these mini dice sets easily fit in your pocket, and each polyhedral set comes with 7 dice (d4, d6, d8, d10, d10 (00-90), d12, and d20). A second mini set at the same size gives you a color-coded option for a second character or a loaner set without adding meaningful weight to the bag.
- Torched Rainbow 16mm Polyhedral Dice Set: Made with solid zinc and plated with shiny-polished nickel, these 16mm metal dice sets are heavy in your hand, and are built to last. This is a full-sized 16mm polyhedral dice set that comes with 7 dice (d4, d6, d8, d10, d10 (00-90), d12, and d20). Because it is solid metal and heavy, this set belongs in the bottom layer of the bag, ideally on a padded surface, so it does not drop onto resin dice during travel.
- Hollow Metal Gear Dice: Sterling Gray with Red Numbers: Hollow metal dice are truly unique and will jingle when shaken up together. This is a full-sized 16mm polyhedral dice set that comes with 7 dice (d4, d6, d8, d10, d10 (00-90), d12, and d20). Hollow metal gives you the metal look with lighter rolls, so it can sit between your heavy solid-metal layer and your resin sets without crushing them.
A goblin bag of holding rewards a simple packing order more than raw capacity. Sort by material, pouch each set, load heavy to light, and stop at two-thirds full. Do that and your dice stay protected, findable, and ready for the next session.
