Quick answer

Paint lava and deep water on terrain by building gradients in thin layers: start with the darkest tone, work toward the brightest, and keep each layer thin enough to see the previous one. Use Pokorny Paint Deep Lava for molten pools and Deep Water Green for water, shaking the bottle before each use and applying directly to unprimed Dwarvenite.

Why gradients matter more than color choice

Lava and water both read as effects because of how light moves through them. A flat coat of orange or green looks like painted plastic; a gradient from dark edges to a bright center looks like depth. The same principle applies to both: darker at the perimeter, lighter where the effect is hottest or shallowest.

Terrain painting gradients work best when you build them in several thin passes rather than one thick coat. Thin layers let you adjust the transition and avoid a hard line where two colors meet. If you rush with a heavy coat, you lose the subtle shift that sells the effect.

Lava vs water: different contrast, same layering logic

Lava wants high contrast: deep reds and browns at the edges, bright orange and yellow at the center. Water wants lower contrast and cooler transitions: dark green at the depths, lighter green where the water is shallow. Both benefit from a final highlight that suggests a surface sheen, but lava highlights should feel hot and water highlights should feel wet.

Because Pokorny Paints are formulated for Dwarvenite and do not need priming or dilution, you can move straight from one layer to the next without worrying about adhesion. That makes them well suited to multi-pass gradient work on terrain pieces that will see handling.

When to stop adding layers

A common trap is overworking the gradient until the colors turn muddy. Stop when the transition reads clearly from arm's length, not under a magnifier. Terrain is viewed at table distance, so a slightly rougher blend often looks better in play than a fussy one.

If you are painting a large pool, work in sections and keep the edges of each section wet so they blend. If you are painting small details, accept a slightly harder transition; the eye will read it as depth anyway.

Step-by-step: painting lava and deep water effects

  1. Shake the bottle and load a thin brush: Shake Deep Lava or Deep Water Green well before each use. Load a brush with a small amount and wick off excess so the paint does not pool. If the paint looks separated, shake longer; a thin, even coat is the goal.
  2. Block in the darkest base tone: Paint the entire pool area with the darkest tone you plan to use. For lava, that might be a deep red-brown; for water, a dark green. Let it dry fully. Do not try to paint the bright center yet; the base sets the depth.
  3. Build the mid-tone in thin layers: Apply the mid-tone (orange for lava, medium green for water) in thin layers, starting slightly inside the edge and working toward the center. Keep each layer thin and let it dry before the next. If the transition looks streaky, you are applying too much paint at once.
  4. Add the brightest highlight at the center: Use the brightest tone sparingly at the hottest or shallowest point. For lava, a yellow-orange; for water, a light green. Feather the edges with a barely damp brush. Stop before the highlight covers more than a third of the pool; less is more.
  5. Check the gradient from table distance: Hold the piece at arm's length. If the transition reads as a smooth shift, you are done. If it looks banded, add one more thin mid-tone layer to soften the line. Overworking is worse than a slightly visible transition; know when to stop.

Products used in this guide

  • Pokorny Paint - Deep Water Green: Pokorny Paint Deep Water Green is a water-based acrylic formulated for Dwarvenite terrain and does not require dilution or priming. You can apply it directly to terrain and build thin layers without adding water that would weaken the pigment.

    Pokorny Paint - Deep Water Green

    Pokorny Paint - Deep Water Green

  • Pokorny Paint - Deep Lava: Pokorny Paint Deep Lava is a water-based acrylic formulated by Stefan Pokorny for optimal viscosity on Dwarvenite terrain. It is ready to use straight from the bottle, so you can focus on layering the gradient rather than mixing.

    Pokorny Paint - Deep Lava

    Pokorny Paint - Deep Lava