What the MAXWELL 2G Paintable Dimmer Switch Offers
The MAXWELL 2G Paintable Dimmer Switch gives you the freedom to match your light switch plate to any wall color. The plate comes primed white and is ready for spray, roller, or brush. The solid brass dial stays unpainted, so you keep a warm metal detail that contrasts with your custom color.
This guide explains how to paint the plate correctly, which areas to avoid, and what to expect from the supplied materials. The dimmer itself is high-spec with auto-detect leading or trailing edge dimming for smooth, flicker-free control with modern LEDs.
Before You Start: What Is Supplied
The MAXWELL 2G Paintable Dimmer Switch includes a primed white plate and a solid brass dial. The plate is designed to accept paint — spray, roller, or brush. The brass dial is not painted, so it remains as a metallic accent.
The supplied information does not include specific paint recommendations or drying times. Use a paint suitable for the plate material (typically a water-based or oil-based primer and paint for metal or plastic). Follow the paint manufacturer's instructions for preparation and drying.
How to Paint the MAXWELL 2G Paintable Dimmer Switch
- Remove the plate from the dimmer module: The plate is modular and can be detached from the dimmer module. Ensure the power is off at the circuit breaker before handling any electrical components.
- Clean the primed surface: Wipe the plate with a damp cloth to remove dust or grease. Let it dry completely. The plate is already primed white, so no additional primer is required unless your paint instructions say otherwise.
- Apply paint to the plate only: Use spray, roller, or brush to apply paint to the plate. Avoid getting paint on the brass dial or the dimmer module. The plate is slim and flat, making it easy to coat evenly.
- Let the paint dry fully: Allow the paint to dry according to the paint manufacturer's instructions. Do not rush this step — a fully cured finish lasts longer and resists chipping.
- Reattach the plate to the dimmer module: Once the paint is dry, reattach the plate to the dimmer module. The modular design lets you combine toggles and dimmers across 1-, 2-, 3-, and 4-gang plates, all finish-matched.
What to Keep Unpainted
Only the plate is paintable. The solid brass dial is designed to remain unpainted as a warm metal detail. If paint accidentally gets on the dial, wipe it off immediately with a damp cloth before it dries. The dial's smooth surface makes cleanup easy if caught early.
MAXWELL 2G Paintable Dimmer Switch at a Glance
-
MAXWELL 2G Paintable Dimmer Switch - Brass: The plate is primed white ready to paint into any wall colour, while the solid brass dial stays unpainted as a warm metal detail. You only need to apply paint to the plate — no priming step required. The brass dial remains as a deliberate accent, not a painting mistake.
MAXWELL 2G Paintable Dimmer Switch - Brass
-
MAXWELL 2G Paintable Dimmer Switch - Brass: Slim, flat and low-profile, the plate takes spray, roller or brush. You can use your preferred painting method. The low-profile design means paint applies evenly without drips or uneven coverage.
-
MAXWELL 2G Paintable Dimmer Switch - Brass: Backed by a 2-year guarantee. Painting the plate does not void the guarantee, as long as you follow the intended use. The guarantee covers manufacturing defects.
What the Supplied Information Does Not Cover
The supplied product record does not include specific paint types, drying times, or application techniques. For best results, use a paint suitable for the plate material and follow the paint manufacturer's instructions. If you are unsure about paint compatibility, test on a small area first.
The dimmer module itself is not paintable. Do not attempt to paint the dimmer mechanism or the brass dial. The modular design allows you to replace the plate if needed, but the dimmer module should remain as supplied.
