Quick Answer
To refill a centre feed dispenser without waste, open the unit, remove the old core, insert the new roll with the tail hanging down through the centre, and pull gently to test the feed before closing.
Why Centre Feed Dispensers Waste Less
Centre feed dispensers, like the Standard Centre Feed Dispenser, dispense paper from the middle of the roll. This design means each sheet is pulled individually, so users take only what they need. Compared to traditional roll dispensers, they can reduce consumption significantly.
However, the savings only happen if the roll is loaded correctly. A misaligned roll can jam, causing users to pull harder and tear off more paper. Proper loading is the key to getting the waste-reducing benefits.
Common Mistakes That Cause Waste
One common mistake is pulling the paper too far out before closing the dispenser. This leaves a long tail that gets wasted as the first users pull it. Another is inserting the roll without aligning the centre hole with the dispenser's feeding mechanism, which can cause jams.
Also, using the wrong size or type of roll can lead to frequent jams. Always check the roll's width and length against your dispenser's specifications.
Step-by-Step Refill Process
- Open the dispenser: Unlock and open the dispenser lid. For models with a locking key, use it to release the latch. Keep the key handy for the next refill. Check that the lid opens fully so you can access the roll without forcing it.
- Remove the old core: Take out the empty roll core and discard it. If there is a stub roll, remove it as well to avoid mixing old and new paper. Never leave a partial roll in place when adding a new one; this can cause double-feeding.
- Insert the new roll: Place the new centre feed roll into the dispenser, ensuring the centre hole aligns with the feeding mechanism. The paper tail should hang down through the centre, not from the outside. Align the roll's core with the dispenser's guide to prevent mis-feeding.
- Pull the paper to test: Gently pull the paper tail to ensure it feeds smoothly. If it catches or tears, re-align the roll and try again. Do not pull out more than a few inches. A smooth pull indicates correct loading; if it jams, reopen and adjust.
- Close and lock the dispenser: Close the lid until it clicks or locks. Ensure the lid is secure to prevent dust and to keep the paper clean. Test the dispenser once more after closing to confirm the paper still feeds.
Dispenser Considerations
-
Standard Centre Feed Dispenser: The Standard Centre Feed Dispenser is designed for fast access and is hard-wearing for busy environments. When refilling, ensure the roll is compatible with the dispenser's dimensions (H: 35cm, W: 23cm, D: 23cm) to avoid jams and ensure smooth dispensing.
Standard Centre Feed Dispenser