Quick answer

Start with the gentlest method and only move up if the mark remains. Clean the figure first, then use a soft cloth with mild soapy water for surface scuffs. For stubborn scratches, a plastic polish or a low-abrasive compound applied in small circles can restore shine. Always test on a hidden area and stop if the paint or finish starts to dull.

What you need before you start

Gather a few basic supplies: a soft microfiber cloth, mild dish soap, lukewarm water, cotton swabs, a plastic polish or scratch-removing compound, and optional fine-grit polishing pads. Avoid paper towels, which can leave lint and micro-scratches. Work in a well-lit area so you can see the mark clearly and monitor your progress.

Identify the type of mark

Not all marks are the same. A scuff is usually a transfer of material from another surface and often sits on top of the finish. A scratch cuts into the surface and may expose the base material. Surface scuffs respond well to gentle cleaning and light polishing. Deep scratches may need filler or touch-up paint, and some may be permanent. Knowing which one you have prevents you from over-polishing and damaging the figure.

Step-by-step scratch removal

Follow these steps in order, checking your progress after each one. If the mark is gone, stop. Overworking an area can dull the finish or remove paint.

Drying and protecting the finish

After polishing, rinse the figure with clean water and pat it dry with a soft cloth. Let it air-dry completely before handling or displaying it. To reduce future scuffs, handle figures by the base, store them separately in padded boxes, and keep them away from abrasive surfaces. A thin layer of plastic-safe wax can add a little protection, but test it first on a hidden spot.

When to stop and accept the mark

Some scratches are too deep to remove without damaging the figure. If the base material is exposed, polishing further will only make it worse. In that case, consider a touch-up with color-matched paint or display the figure in a way that hides the mark. For valuable pieces, consult a professional restorer rather than risking further damage.

Scratch and scuff removal steps

  1. Clean the figure: Mix a drop of mild dish soap with lukewarm water. Dampen a soft microfiber cloth and gently wipe the figure. Use a cotton swab for crevices. Rinse with clean water and pat dry. Common mistake: using hot water or harsh cleaners, which can dull or discolor the finish.
  2. Test a hidden area: Apply a tiny amount of plastic polish or scratch remover to an inconspicuous spot, such as the back of the base. Wait a few minutes and check for any adverse reaction. Checkpoint: if the finish becomes cloudy or sticky, stop and try a milder product.
  3. Apply polish to the scratch: Put a small dab of polish on a soft cloth or cotton swab. Rub gently in small circles over the scratch. Use light pressure and check progress every few seconds. Common mistake: rubbing too hard or too long, which can remove surrounding paint or create a dull spot.
  4. Buff away residue: Use a clean part of the cloth to buff the area in circular motions until the polish residue is gone and the surface looks even. Checkpoint: the scratch should be less visible and the shine restored. If not, repeat once with very light pressure.
  5. Rinse and dry: Rinse the figure with clean water to remove any polish residue. Pat dry with a soft cloth and let it air-dry completely before handling. Common mistake: leaving polish residue in crevices, which can attract dust and look messy.
  6. Protect and store: Handle figures by the base, store them in a padded box or display case, and keep them away from rough surfaces. Consider a plastic-safe wax for extra protection. Next step: if the scratch is too deep, consider a professional touch-up or display the figure to hide the mark.

Product facts

  • SKULLPANDA The Feast Begins Series Blind Box Figures: SKULLPANDA The Feast Begins Series Blind Box Figures are made of PVC and ABS, with a maximum height of 15 cm (5.91 inches). PVC and ABS are common materials for blind box figures; they respond well to gentle cleaning and plastic polish, but harsh solvents can damage the finish.
  • 【Sale】Keynos' Kingdom Of Graffiti Series Bean Blind Box: Keynos' Kingdom Of Graffiti Series Bean Blind Box figures are about 2.8 cm tall and made of PVC. Small PVC figures have delicate details and thin paint, so use a light touch and avoid abrasive compounds that can wear away fine features.