Quick answer
To replace Alessi spare part 35740, you simply swap the cracked or worn glass carafe in your 3-cup French Press (models 9094/3 or MGPF 3) with the genuine replacement. The process takes about five minutes and requires no tools.
Why use the genuine spare part?
Alessi spare part 35740 is designed specifically for the 3-cup French Press models 9094/3 and MGPF 3. Using a non-genuine carafe may not fit the plunger assembly or the stainless steel frame correctly, leading to leaks or breakage. The genuine part ensures your coffee maker continues to perform as intended and maintains its clean Italian design.
What you need before you start
You only need the replacement glass carafe (part 35740) and your existing Alessi French Press. No screwdrivers, pliers, or adhesives are required. Make sure the old carafe is completely empty and cool to the touch before handling.
Step-by-step replacement guide
- 1. Remove the plunger assembly: Unscrew the plunger knob and lift the entire plunger assembly (rod, spring, and filter) out of the old carafe. Set it aside on a clean, dry surface. Do not force the plunger if it feels stuck; twist gently to release any coffee grounds that may have lodged between the filter and the glass.
- 2. Separate the old carafe from the frame: Hold the stainless steel frame with one hand and gently lift the old glass carafe upward and out of the base. The carafe is not glued or screwed in—it simply rests inside the frame. Check the rubber gasket at the bottom of the frame. If it is cracked or missing, order a separate gasket spare before reassembling.
- 3. Insert the new glass carafe (part 35740): Place the new carafe into the frame, aligning the bottom with the base. Press down gently until it sits evenly. The carafe should not wobble or tilt. Make sure the carafe is fully seated—if it sits too high, the plunger may not seal properly when you brew.
- 4. Reattach the plunger assembly: Lower the plunger assembly back into the new carafe. Screw the knob back on until it is snug but not overtightened. The filter should sit flat against the bottom of the carafe. Overtightening the knob can crack the new glass. Stop turning as soon as you feel resistance.
- 5. Test with water before brewing coffee: Fill the carafe with hot water (not boiling), insert the plunger, and press down slowly. Check for leaks around the base and the plunger rod. If everything holds, your replacement is successful. If water seeps past the plunger filter, the assembly may not be aligned—remove and reseat it before your first brew.
Product facts
-
35740: This replacement glass carafe is designed specifically for ALESSI French Press coffee makers, ensuring a precise fit for models 9094/3 and MGPF 3 in the 3-cup size. You can be confident the new carafe will seat correctly in the frame and work with your existing plunger, avoiding leaks or instability.
35740