What You Need to Seal a Letter
To seal a letter with a wax seal stamp, you'll need a wax seal stamp head, a handle, wax beads or sticks, a melting spoon or glue gun, and an envelope. The stamp head is the metal piece that carries the design. The SumLilThings Wax Seal - Anywhere But Here (25mm) is a brass stamp head engraved with a whimsical design, perfect for adding a personal touch to your mail. Remember, you will need a handle to use the stamp head, as it is sold separately.
About the Wax Seal - Anywhere But Here (25mm)
-
Wax Seal - Anywhere But Here (25mm): Made with high quality brass metal and laser engraved with design. The brass construction ensures durability and sharp impressions, while the laser engraving guarantees a crisp, detailed design on every seal.
Wax Seal - Anywhere But Here (25mm)
-
Wax Seal - Anywhere But Here (25mm): You will receive one metal wax stamp head. You will need a handle in order to use the stamp. This stamp head is interchangeable, so you can swap designs with the same handle. Make sure to purchase a compatible handle separately.
-
Wax Seal - Anywhere But Here (25mm): Designed & Illustrated by ©SumLilThings Each design is original, giving your letters a unique, artistic flair that stands out from mass-produced seals.
Step-by-Step: How to Seal a Letter
Follow these steps to create a clean wax seal on your envelope.
- Prepare your workspace: Lay your envelope flat on a heat-resistant surface. Have your wax seal stamp head attached to a handle, and melt your wax according to the wax manufacturer's instructions.
- Apply the melted wax: Drip a small puddle of melted wax onto the envelope flap where you want the seal. Aim for a puddle about the size of the stamp head (25mm for the Anywhere But Here stamp).
- Press the stamp: Wait for the wax to cool slightly (it should look matte and feel tacky, not runny). Press the stamp straight down firmly, hold for a moment, then lift gently without twisting. Follow the product instructions for specific timing.
- Let it cure: Allow the seal to cool completely before handling or mailing. This usually takes a minute or two. Avoid touching the wax while it sets to prevent smudging.
Tips for a Clean Impression
For the best results, use enough wax to cover the stamp head area without overflowing. A small, steady drip works better than one large blob. If your first attempt is uneven, you can scrape off the wax and try again. The brass stamp head is easy to clean with a soft cloth while the wax is still warm. Store your stamp head in a dry place to prevent tarnishing.
