Why Your Ultralight Tarp Needs Seam Sealing

Most ultralight silnylon and silpoly tarps, including the Deschutes Ultralight Backpacking Tarp, are not sealed at the factory. The seams where fabric panels are joined are the most likely place for water to enter. Applying a compatible silicone seam sealer is the only way to make those seams waterproof.

The Deschutes Tarp is constructed from silicone-impregnated nylon, so it requires a sealer formulated for silicone fabrics. Seam Grip + Sil (SilNet) is designed specifically for Silicone Nylon and Silicone Polyester shelters. Using a standard polyurethane-based sealer on silicone fabric will not bond properly and will peel off.

What You Need for the Job

  • Seam Grip + Sil (SilNet): Seam Grip + Sil (SilNet) is a silicone seam sealer formulated for use with silicone-impregnated fabrics. Using the correct sealer ensures a permanent, watertight bond that won't peel or degrade over time.

    Seam Grip + Sil (SilNet)

    Seam Grip + Sil (SilNet)

  • Seam Grip + Sil (SilNet): The 1-1/2 oz. tube seals critical seams on most ultralight two person tents. A single tube is enough to treat the seams of a solo tarp like the Deschutes, with some left over for touch-ups.

  • Deschutes Ultralight Backpacking Tarp: The Deschutes Ultralight Backpacking Tarp is made from silicone nylon and weighs 13 oz. Knowing the fabric type confirms that Seam Grip + Sil is the correct sealer for this shelter.

    Deschutes Ultralight Backpacking Tarp

    Deschutes Ultralight Backpacking Tarp

How to Apply Seam Grip + Sil to Your Tarp

Seam Grip + Sil is fast and easy to use. Follow these steps for a reliable seal.

  1. Prepare the tarp: Set up your tarp in a clean, dry area with good ventilation. Pitch it taut so the seams are accessible. Wipe the seam area with a clean cloth to remove dust or debris.
  2. Apply the sealer: Squeeze a small bead of Seam Grip + Sil directly onto the seam. Use your finger or a small brush to spread it evenly into the stitch holes. The sealer should soak into the fabric rather than sit on top.
  3. Let it cure: Allow the sealer to dry completely. The manufacturer states that the exclusive formula is unaffected by temperature extremes, but avoid moving the tarp until the sealer is no longer tacky. Overnight curing is recommended.
  4. Test the seal: Once dry, inspect the seams for any missed spots. If you have a hose or a spray bottle, lightly mist the seams from the outside and check for water entry from the inside.

What to Keep in Mind

Seam Grip + Sil is intended only for silicone-impregnated fabrics. Do not use it on polyurethane-coated nylon or polyester. The Deschutes Tarp is made from silicone nylon, so it's a perfect match.

The Deschutes Tarp is a floorless shelter, so seam sealing the tarp seams is the most important step for keeping you dry. The tarp's pyramid design provides 360° protection, and with sealed seams, it will shed rain reliably.

If you plan to pair the Deschutes with the Serenity NetTent (sold separately), the net tent has its own bathtub floor. Seam sealing the tarp remains important for overhead protection and to prevent water from dripping through the seams.