What the LongReach 4-Channel Relay Module Does

The LongReach 4-Channel Relay Module, used together with the LongReach Digital Transmitter Module, lets you control up to four electrical devices from a distance. Because it uses LoRa technology, its range goes well beyond what you get with typical WiFi or Bluetooth connections. This makes it a practical choice for garages, outbuildings, sheds, or other spots where running wires is inconvenient or impossible.

This guide covers the basic setup concept using the supplied product information. Since the available evidence does not include detailed wiring diagrams or programming steps, we focus on what is confirmed: the module's purpose, its pairing requirement, and the general approach to getting it working.

General Setup Approach

The following steps outline the typical process for setting up a LongReach relay system. Note that specific wiring and configuration details depend on your transmitter module and the devices you want to control.

  1. Pair the Transmitter and Receiver: The LongReach 4-Channel Relay Module must be combined with a LongReach Digital Transmitter Module. Ensure both modules are powered and within range during initial pairing. Refer to the transmitter's manual for binding instructions.
  2. Connect Power to the Relay Module: The relay module requires a suitable power supply. Check the module's voltage and current ratings (not supplied in the available evidence) and connect a regulated supply accordingly. Do not exceed the module's rated limits.
  3. Wire the Devices to the Relay Channels: Each of the four relay channels has normally open (NO), normally closed (NC), and common (COM) terminals. Connect your electrical device (e.g., a light, pump, or motor) to the appropriate terminals. Ensure the load does not exceed the relay's rated current and voltage.
  4. Test the Wireless Link: After wiring, power on the transmitter and send a command to each relay channel. Verify that the relay clicks and the connected device responds correctly. Test the range in your intended location to confirm reliable communication.

Product Evidence

  • LongReach (LoRa) 4-Channel Relay: The LongReach 4-Channel Relay Module, combined with the LongReach Digital Transmitter Module, enables control of up to four electrical devices over extended distances. This confirms that the relay module cannot work alone; you need the matching transmitter module for wireless control.

    LongReach (LoRa) 4-Channel Relay

    LongReach (LoRa) 4-Channel Relay

  • LongReach (LoRa) 4-Channel Relay: Based on LoRa technology, its range surpasses common wireless technologies like WiFi or Bluetooth, making it perfect for use in areas such as garages, outbuildings, and similar remote locations. LoRa's long-range capability is the key advantage of this module, making it suitable for locations where WiFi or Bluetooth would not reach reliably.

What You Need to Know Before Starting

The available product information confirms the module's purpose and pairing requirement but does not include specific wiring diagrams, power ratings, or configuration software details. For a complete setup, you will need to refer to the documentation provided with your LongReach Digital Transmitter Module and the relay module itself. Also, ensure your electrical loads are within the relay's unspecified ratings — check the module's label or included datasheet for exact specifications.

If you are new to working with relay modules, take standard precautions: disconnect power before wiring, use appropriately rated wire, and secure all connections. The LongReach system is designed for reliable long-range control, but proper installation is essential for safe operation.