Why a Bass Restoration LOC Makes Sense for Factory Systems

Factory car audio systems often roll off low bass to protect stock speakers, leaving classic rock, older hip-hop, or Banda music sounding thin. A bass restoration line output converter (LOC) like the Wavtech bassRESTOR fills in those missing low frequencies, restoring the punch that was engineered out. This guide explains how to set one up with its built-in subsonic filter for clean, controlled bass.

What the Wavtech bassRESTOR Offers

Setting Up the Bass Restoration LOC

The following steps outline how to connect and tune the Wavtech bassRESTOR. Always refer to the product manual for exact wiring details.

  1. Connect Power and Ground: The bassRESTOR requires a 12V power source. Connect the red wire to a switched 12V supply and the black wire to a clean chassis ground. Use the locking detachable power terminal for a secure connection.
  2. Connect Audio Inputs: Use the speaker-level inputs if tapping into factory speaker wires, or RCA inputs if using an aftermarket source. The differential balanced inputs reject noise common in factory wiring.
  3. Set Auto Turn-On: The unit can turn on automatically via DC-offset or audio signal detect. Choose the mode that matches your system; no separate remote wire is needed unless you prefer one.
  4. Adjust the Subsonic Filter: Use the variable frequency subsonic filter to remove ultra-low frequencies that waste amplifier power and can damage subwoofers. Start with the filter set according to the product instructions and adjust by ear.
  5. Tune the Bass Restoration Effect: Use the Multi-Function Remote RLC to adjust the amount of bass restoration. Start with the effect at minimum, play a track known to lack bass, and increase until the low end sounds natural without distortion.
  6. Set Gain with Clip LED: With the system playing at a moderate volume, turn the gain up until the Clip LED flickers, then back off slightly. This sets maximum clean output.

Using the Remote Level Control

The included Multi-Function Remote RLC lets you adjust overall bass volume, the amount of restoration effect, or defeat the effect entirely when it's not needed. Mount it within easy reach of the driver for on-the-fly tuning. This is especially useful when switching between music genres that have different bass content.

What the Supplied Information Does Not Cover

The product record confirms the bassRESTOR’s features and specifications but does not include detailed installation instructions for every vehicle. Wiring colors, factory radio removal, and speaker wire identification vary by make and model. For those steps, consult vehicle-specific guides or a professional installer.