Quick Answer

Mount the OpenMoon grid onto the front of the ARRI SkyPanel S30-C using the built-in attachment points, then secure it evenly to prevent light leak and sagging.

Why Use a Grid on the S30-C

A grid narrows the beam of the SkyPanel S30-C, reducing spill on walls, backgrounds, and reflective surfaces. This is especially useful when you need to light a subject or set area without affecting the surrounding environment. The OpenMoon grid is designed to retain the broad character of the S30-C source while adding directional control.

Compatibility and Fit Considerations

Before purchasing, confirm that the grid matches your specific ARRI SkyPanel S30-C model. The OpenMoon grid is a front-mounted accessory, so it attaches directly to the fixture. If you are using a different SkyPanel variant, check compatibility with the manufacturer or your local dealer.

Grid Setup Steps

  1. Power Down and Position the Fixture: Turn off the SkyPanel S30-C and let it cool if it has been running. Place it on a secure stand or flat surface at a comfortable working height. Always handle the fixture when powered off and cool to avoid burns or electrical risk.
  2. Align the Grid with the Front of the Panel: Hold the OpenMoon grid so its attachment points line up with the corresponding slots or hooks on the front of the S30-C. Do not force it; alignment should be natural. If the grid does not align easily, stop and check that you have the correct model for your SkyPanel.
  3. Attach the Grid Evenly: Starting from one corner, press the grid onto the attachment points, working around the perimeter to ensure even tension. Avoid pulling one side too tight before the others are secured. Even attachment prevents sagging and light leak along the edges.
  4. Secure and Test the Fit: Once all attachment points are engaged, gently tug on the grid to confirm it is firmly mounted. Power on the fixture and check for any gaps or uneven light falloff. A quick visual test with the light on will reveal any misalignment or loose spots.
  5. Adjust for Desired Beam Spread: If your grid has adjustable blades or louvers, angle them to fine-tune the beam spread. For a tighter spot, close the louvers; for a broader wash, open them. Take a light reading or check your camera monitor to confirm the effect matches your intent.

Product Facts