Quick Answer
To set up the Lunar bedside crib safely, start by assembling the frame, then attach the drop-down panel to your bed, and adjust the height to match your mattress top before placing your baby in.
Why Bedside Attachment Matters
The Lunar is designed for side-by-side sleeping, which means the drop-down panel must be securely attached to your bed frame. If the gap between the mattress and the crib is too wide, your baby could roll into it. Always check that the crib is flush against your bed and that the attachment straps are tight.
Height and Incline Adjustments
The crib offers 7 height positions and an incline setting to help with reflux. The correct height is one where the crib mattress sits level with your mattress top—any lower and you create a drop-off; any higher and the gap becomes unsafe. For the incline, use it only when your baby has reflux and always follow the manufacturer's guidance.
Step-by-Step Setup
- Unpack and identify parts: Lay out all components from the box and check that you have the frame, mattress, drop-down panel, and attachment straps. Refer to the manual for a parts list. If any part is missing, do not proceed—contact Silver Cross support.
- Assemble the frame: Connect the frame tubes according to the manual, ensuring each joint clicks securely into place. Do not force connections; if they don't align, re-check the orientation. Test the frame stability by gently pressing on each corner before continuing.
- Attach the mattress base: Place the mattress base into the frame at the desired height. Choose a height that will align with your bed mattress top once the crib is beside your bed. Ensure the base is fully engaged on all sides—a loose base can sag and create a gap.
- Fit the mattress and liner: Place the bamboo-lined mattress and mattress protector into the crib, smoothing out any wrinkles. The mattress should fit snugly with no gaps around the edges. A tight-fitting mattress reduces the risk of entrapment.
- Position the crib beside your bed: Move the crib next to your bed and align the drop-down side with your mattress. Ensure the crib is level and the gap between the two mattresses is minimal (no more than a finger's width). If the gap is wider than a finger, adjust the height or reposition the crib.
- Secure the bedside attachment: Lower the drop-down panel and use the attachment straps to secure the crib to your bed frame. Tighten the straps so the crib cannot move away from the bed. Check that the straps are not loose—a wobbly crib is a safety hazard.
- Adjust height and incline as needed: If your baby has reflux, set the incline to the recommended angle. Otherwise, keep the crib flat. Re-check the height alignment after any adjustment. Always re-test the gap after changing height or incline.
About the Lunar Bedside Crib
-
Lunar Bedside Crib Whisper Grey: The Lunar bedside crib includes a drop-down panel and bedside attachment for safe side-by-side sleeping. This feature lets you keep your baby within arm's reach at night while maintaining a separate sleep surface, which is recommended for safe sleep.
Lunar Bedside Crib Whisper Grey
-
Lunar Bedside Crib Whisper Grey: It offers 7 height positions with an incline setting to aid with reflux. You can match the crib height to your bed and adjust the incline when needed, helping your baby sleep more comfortably and safely.
