Quick Answer

Swapping an EDC buckle on your Nexbelt strap takes under a minute. You just need to remove the two set screws, slide the old buckle off, and attach the new one.

Why Swap Your EDC Buckle?

EDC buckles let you change your belt's look or function without buying a whole new belt. Whether you want a different color for an event or a more compact buckle for appendix carry, swapping is fast and tool-free.

What You'll Need

You only need a new EDC buckle and your existing Nexbelt ratchet strap. No tools required—the buckles use two set screws that you can turn by hand.

Step-by-Step Buckle Swap

  1. Remove the set screws: Turn the two set screws on the back of your current buckle counterclockwise by hand until they are loose enough to pull out. Keep the screws in a safe place—you'll reuse them. Common mistake: dropping the screws. Work over a table or tray.
  2. Slide the old buckle off the strap: Pull the strap end through the buckle opening. If the strap has a keeper or tip, make sure it doesn't catch on the buckle edges. Check that the strap is not twisted before sliding the buckle off.
  3. Attach the new buckle: Slide the strap end through the new buckle's opening. Align the buckle so the strap sits flat and the set screw holes line up with the strap's pre-drilled holes. If the strap has multiple hole sets, use the ones that center the buckle on the strap.
  4. Tighten the set screws: Insert the two set screws through the buckle and into the strap holes. Turn them clockwise by hand until snug. Do not overtighten—finger-tight is enough to hold securely. Overtightening can strip the screw threads or damage the buckle.
  5. Test the buckle function: Give the strap a gentle tug to confirm the buckle is secure. Then operate the ratchet mechanism a few times to ensure smooth engagement and release. If the buckle feels loose or the ratchet sticks, remove and reattach with the screws slightly looser.

EDC Buckle Options

  • Frances EDC Buckle, Fits 1.38" [35mm] Strap: Frances EDC Buckle fits a 1.38" strap with a brushed nickel finish and has an equestrian D-ring design with a ratchet buckle spin. Choose this if you want a stylish, safety-minded buckle that works with narrower straps.

    Frances EDC Buckle, Fits 1.38" 35mm Strap

    Frances EDC Buckle, Fits 1.38" [35mm] Strap

  • Titan Brown EDC Buckle, Fits 1.50" [38mm] Strap: Titan Brown EDC Buckle fits a 1.50" strap, has a granite-brown textured powder coat, and uses two set screws instead of pins for a reliable hold. The powder coating resists wear, making it a durable choice for daily carry.

    Titan Brown EDC Buckle, Fits 1.50" 38mm Strap

    Titan Brown EDC Buckle, Fits 1.50" [38mm] Strap